- 6
- 0
- 约8.9千字
- 约 18页
- 2023-02-21 发布于四川
- 举报
Quick Guide
Dai_ServoGun Install Process
Bernd Steffens TF/VAS
2019-04-30
Dai_ServoGun Install Process
Preface
From Dai_ServoGun V8 the data transfer of the gun positions is optionally implemented via ProConOS (SoftPLC).
As a temporary measure, the Bosch Pnet Device must, in cooperation with the ProConOS module, be imported to the control
system as a subsidiary project separately from the iKOP installation.
Prerequisite:
Option DAI_BASEPROJECT_85_3_2_4 or installed in the WoV
Option DAI_ServoGunV85_4_29_58 or installed in the WoV
原创力文档

文档评论(0)