毕业论文-汽车空压机曲轴加工工艺设计.docVIP

PAGE I 汽车空压机曲轴加工工艺设计 摘 要 曲轴是空压机的主要零件，形状复杂，刚度差，容易变形，精度要求高，加工比较困难，对机床和刀具有特殊的要求。通常，曲轴的加工过程可以分为三个阶段。第一解阶段主要是以铣、钻为主的基准加工，铣定位面和中心孔；第二阶段是以车、钻为主完成全部轴颈的粗加工；第三阶段为以磨、抛光为主的精加工。此外一条完整的曲轴生产线还包括装配、测量、检测、清洗防腐等工序。 关键词： 空压机、曲轴、工艺规程 Abstract The song shaft is main parts, shape complicacy of the air compressor, just the degree is bad, and the strain, accuracy request high, process the comparison difficulty,and request engine bed and tool angel had specially. Can usually processing of song shaft the process be divided into three steps. Basis that first stage is main therefore milling, drill to lordto process, mi