花椒采摘机的设计【赠CAD图纸、SW三维模型】.docx

摘要 花椒釆摘是花椒生产的一个非常重要的部分。选用的劳动力占整个生产过 程的1 / 3-1 / 2,不仅季节性较强而且复较杂。花椒釆摘机的使用给我们带 来很大的好处，手工釆摘花椒时可以解决高成本，低效率和劳动强度的问题。另 外，现在所用到的比较大型的采摘机械耗资比较大，而且携带也不太方便，所以 并没有广泛普及，而是用在一些投资规模比较大的农场中使用。针对于少量种植 花椒的农户来讲，应用起来不太现实。本次设计则解决的是这样的问题。 本着简单实用的目的，在这里设计了一款新型的花椒采摘机构。该设计所用 的支撑杆为可伸缩型的薄壁结构，一端连接固定把手，并旦在下端固定有控制线 的伸缩滑轮，方便操作。另一个伸缩端则固定了釆摘机构。本设计所用到的控制 线选择从伸缩杆内部通过，可以避免挂在树枝上，或者线头缠绕锁死的情况。另 外釆用了三级伸缩的设计，每一级伸缩的长度是一米，全部伸开则为三米，1-3 米的设计，则方便采摘生长在不同高度的花椒。 【关键词】釆摘机 机械设计  /砌知机的设计［含礙CADS统.SW三360曲 文件 麥作 工 結幼 省 ..（±级目录） ooffls^ia SW三雄瞰 文快 三格式 文昧 ■）卜础采■机的设计?说明书.do 1.8 MB L4 MB DOC文件 Qao-?BH.dwg 264.8 KB 58.4 KB DWG XI* sty? .打Ep 1.2 MB 1.2 MB 360政ZIP文件 四切 WWSW.DWG 243.9 KB 56.9 KB DWG文件 建切割上AB.DWG 197.6 KB 38.0 KB DWG交件 四切割下亀.DWG 192.1 KB 33.9 KB DWG文件 偽凸命Sff.DWG 188.0 KB 30.7 KB DWG文件 9?g.DWG 187.6 KB 34.6 KB DWG文件 大小：5.3 MB共33个文件和3个文件夫正茹 69.1% Abstract Pepper picking is a very important part of the production of peppercorns. The selected labor force accounts for 1 / 3-1 / 2 of the entire production process, which is not only seasonal but also more complex. The use of pepper picking machines has brought us great benefits. When picking peppers manually, it can solve the problems of high cost, low efficiency and labor intensity. In addition, the relatively large-scale picking machines currently used are relatively expensive and are not convenient to carry, so they are not widely used but are used in some farms with relatively large investment scale. For a small number of farmers planting pepper, the application is not realistic. This design solves this problem. For a simple and practical purpose, a new type of pepper picking mechanism was designed here. The support rod used in this design is a retractable thin-walled structure. One end is connected with a fixed handle, and a telescopic pulley with a control wire is fixed at the lower end to facilitate the operation. Another telescopic end holds the picking mechanism. The control line used in this design is chosen to pass through the interior of the telescopic rod