ug轿车建模毕业设计.pdfVIP

轿车车身的三维设计及强度分析 门飞 （陕西理工学院热能与动力工程专业汽车072 班，陕西 汉中 723000） 指导教师：赵永强 [摘要] 为了达到节能与环保主题的要求，首先要对轿车车身进行优化设计，在最短的设 计周期完成最佳的设计方案，然后通过对合适的轻量化材料和轻量化设计方案的选定，在 满足汽车行驶的安全性、舒适性的基础上，以达到降耗减排的目的。 本设计以 UG 为建模软件，以 CATIA 为分析软件，对轿车车身进行三维设计以及强度 分析。 （1 ）在建立模型方面,熟悉掌握 UG 曲面设计模块,从车身的各个部分的设计,再到分析 优化。 （2 ）在强度分析方面，研究了当前比较广泛使用的汽车轻量化材料，在满足强度需要 下，减轻车身重量已达到降耗减排的目的。 [关键词] 车身轻量化设计，轿车车身 ，强度分析，优化设计 The 3D Design and Strength Analysis Of Car Body Men Fei (Shaanxi University of Technology ，Major Heat Energy and Dynamic Engineering ，Grade07,Class2,Hanzhong 723000 ，Shaanxi ) Advisor: Zhao Yongqiang Abstract ：In order to achieve the theme of energy saving and environmental protection requirements, we must first optimize the design of the car body in the shortest design cycle to complete the best design, and then through a suitable lightweight materials and lightweight design programs selected to meet the automotive driving safety, comfort, based on in order to achieve the purpose of saving and emission reduction. UG as a model of the design software for CATIA analysis software, three-dimensional car body design and strength analysis. (1) in the establishment of modeling, surface design module UG familiar with, from various parts of the body design, to analysis and optimization. (2) In the strength analysis, the study compared the current extensive use of lightweight materials, vehicles, to meet the needs of lower intensity, to reduce body weight has reached the Keywords : Body lightweight design, car body, strength purpose of saving and emission reduction. analysis, optimization design