NASA 航空航天材料的一般焊接要求.pdfVIP

NASA TECHNICAL NASA-STD-5006A STANDARD Approved: 2015-07-31 National Aeronautics and Space Administration Superseding NASA-STD-5006 Washington, DC 20546-0001 GENERAL WELDING REQUIREMENTS FOR AEROSPACE MATERIALS MEASUREMENT SYSTEM IDENTIFICATION: METRIC/INCH-POUND APPROVED FOR PUBLIC RELEASE – DISTRIBUTION IS UNLIMITED NASA-STD-5006A DOCUMENT HISTORY LOG Status Document Approval Date Description Revision Baseline 1999-02-17 Baseline Release Revision A 2015-07-31 General Revision APPROVED FOR PUBLIC RELEASE – DISTRIBUTION IS UNLIMITED 2 of 33 NASA-STD-5006A FOREWORD This Standard is published by the National Aeronautics and Space Administration (NASA) to provide uniform engineering and technical requirements for processes, procedures, practices, and methods that have been endorsed as standard for NASA programs and projects, including requirements for selection, application, and design criteria of an item. This Standard is approved for use by NASA Headquarters and all NASA Centers, including Component Facilities and Technical and Service Support Centers. This Standard establishes general directions and describes the type of information that NASA expects for welded structures. This Standard does not provide the detailed process and quality assurance requirements for weldments on flight hardware. Instead, it is intended as a higher level document which states minimum requirements for welded hardware. “Requests for in