ISO 6507-1-2005 金属材料-维氏硬度试验 第1部分：试验方法.pdfVIP

INTERNATIONAL ISO STANDARD 6507-1 Third edition 2005-12-15 Metallic materials — Vickers hardness test — Part 1: Test method Matériaux métalliques — Essai de dureté Vickers — Partie 1: Méthode dessai Reference number ISO 6507-1:2005(E) ii Contents Page Foreword iv Introduction v 1 Scope 1 2 Normative references 1 3 Principle 2 4 Symbols and abbreviated terms 2 5 Testing machine 3 6 Test piece 3 7 Procedure 3 8 Uncertainty of the results 5 9 Test report 5 Annex A (normative) Minimum thickness of the test piece in relation to the test force and to the hardness 6 Annex B (normative) Tables of correction factors for use in tests made on curved surfaces 8 Annex C (informative) Procedure for periodic checking of the testing machine by the user 12 Annex D (informative) Uncertainty of the measured hardness values 13 Bibliography 19 iii Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is norma