NORYL™ PPE+PS SE1GFN1原版物性表（原厂商提供）.pdfVIP

NORYL™ RESIN SE1GFN1 REGION ASIA DESCRIPTION NORYL™ SE1GFN1 resin is a 10% glass reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V1 at 1.5mm along with UL746C Outdoor Suitability rating of F1 and RTI 110C. NORYL SE1GFN1 exhibits high heat resistance, good dielectric strength, dimensional stability, hydrolytic stability, and very low moisture absorption. This material is an excellent candidate for appliance internals, indoor and outdoor electrical enclosures / housings / connectors. TYPICAL PROPERTY VALUES Revision PROPERTIES TYPICAL VALUES UNITS TEST METHODS MECHANICAL Tensile Stress, brk, Type I, 5 mm/min 74 MPa ASTM D638 Tensile Strain, brk, Type I, 5 mm/min 5 % ASTM D638 Flexural Stress, brk, 1.3 mm/min, 50 mm span 119 MPa ASTM D790 Flexural Modulus, 1.3 mm/min, 50 mm span 3990 MPa ASTM D790 Hardness, Rockwell L 104 - ASTM D785 IMPACT Izod Impact, notched, 23°C 96 J/m ASTM D256 Izod Impact, notched, -4