接口RS232串口通信.docVIP

接口RS232串口通信 华北科技学院计算机学院综合性实验 实 验 报 告 课程名称 接口技术 实验学期 2014 至 2015 学年 第 2 学期 学生所在学院部 计算机学院 年级 专业班级 学生姓名 学号 任课教师 顾涛 实验成绩 计算机学院制 2--per ml sodium hydroxide [c (NaOH) =1.000 mol/L] potassium hydrogen phthalate standard solution of quality g. ... After dilution to 1000mL. 1.1.2 0.000 35mol/L iodine solution: dissolve 20 g of potassium iodide in Cheng You (30~40) 500mL mL water bottle; 5mL iodine stock solution, and then diluted to scale and mix. This solution every other day to prepare. 1.1.3 acetate buffer (PH5.3): dissolve 87g sodium acetate (CH3COONa ? 3H2O) 400mL water and 10.5mL in glacial acetic acid is dissolved in a small amount of water. volume and then mixing the two together and add water to 500mL, using regulation to PH5.3. 1.1.4 0.5mol/L sodium chloride: 14.5 g of sodium chloride dissolved in boiled water, and constant volume to 500mL. 1.1.5 soluble starch: pure before use should determine its value. Accurate said take amount starch (equivalent to dry state 1g) Yu 250mL high type beaker in the, added 80~90mL distilled water, Yu asbestos online in constantly mixing Xia quickly heating to boiling, then with fire keep micro-boiling 3min, stamped and cooling to at room temperature, transfer to 100mL capacity bottle in the, into 40 ? water bath in the makes solution reached this temperature, and in 40 ? Shi with distilled water (40 ?) set capacity, this starch solution placed 40 ? thermostat water bath in the for determination samples with. 1.2 the instrument a) constant temperature water bath: (40+-0.2) 0C. B) spectrophotometer. 1.3 procedures 1.3.1 preparation of samples: weighing 50mL 10G sample 华北科技学院计算机学院综合性实验报告 《接口技术》课程综合性实验报告 开课实验室: 接口实验室 2015 年 6 月 5日 实验题目 串口通信 一、实验目的 1、了解RS232串口通信原理。 2、掌握串口波特率设置方法。 3、通过简单101规约开发，掌握通信协议的开发过程。 掌握串行接口芯片8251的工作原理和编程方法。 二、设备与环境 PC机，实验箱，导线 三、实验内容 1、8251可进行同步异步接收/发送,采用全双工，双缓冲发送/接收。按原理图连接好电路,其中8254计数器用于产生8251的发送和接收时钟，TXD和RXD连在一起。原理图如下所示: 2、补充知识: 可编程串行接口芯片8251A:通用同步/异步接收/发送器USART 1)基本结构 接收部分:异步方式时，能把接收到的数据去掉起始位、停