IC设计中的功耗分析的流程2.docxVIP

二. 布局布线后的功耗分析 现在 ptpx 也支持多电压域的功耗分析，并提供了一个范例脚本，这里描述多时钟域时要用到 UPF，叫 unified powerformat。这里不介绍。 # Read libraries, design, enable power analysis # and link design set power_enable_analysis true set link_library slow_pgpin.db read_verilog power_pins.v link # Create back-up power nets create_power_net_info vdd_backup -power create_power_net_info vss_backup -gnd # Create domain power nets create_power_net_info t_vdd -power -switchable \ -nominal_voltages{1.2} -voltage_ranges{1.1 1.3} create_power_net_info a_vdd -power create_power_net_info b_vdd -power # Create domain ground nets create_power_net_info t_vss -gnd create_power_net_info a_vss -gnd create_power_net_info b_vss -gnd # Create internal power nets create_power_net_info int_vdd_1 -power \ -nominal_voltages{1.2} -voltage_ranges[1.1 1.3} \ -switchable create_power_net_info int_vdd_2 -power \ -nominal_voltages{1.25} -voltage_ranges{1.1 1.3} create_power_net_info int_vdd_3 -power \ -nominal_voltages{1.2} -voltage_ranges{1.1 1.3} create_power_net_info int_vdd_4 -power # Create power domains create_power_domain t create_power_domain a -object_list[get_cells PD0_inst]\ -power_down -power_down_ctrl[get_nets a] \ -power_down_ctrl_sense 0 create_power_domain b -object_list [get_cells PD1_inst]\ -power_down # Connect rails to power domains connect_power_domain t -primary_power_net t_vdd \ -primary_ground_net t_vss connect_power_domain a -primary_power_net a_vdd \ -primary_ground_net a_vss \ -backup_power_net vdd_backup \ -backup_ground_net vss_backup connect_power_domain b -primary_power_net b_vdd \ -primary_ground_net b_vss # Set voltages of power nets set_voltage 1.15 -object_list{t_vdd a_vdd b_vdd} # Read SDC and other timing or power assertions set_input_transition 0.0395 [all_inputs] set_load 1.0 [all outputs] # Perform timing analysis update_timing # Read switching activity set_switching_activity... set_switching_activity... ... report_power 三. 关于报告 一个标准的报告： Power Group Power Power Power Power ( %) Attrs io_pad 0.0000 0.