PTP学习笔记2分析和总结.docxVIP

PrimeTime PX 学习笔记 2 Time-Based Power Analysis Mode Script: ##################################################### # Set the Power Analysis Mode ##################################################### set power_enable_analysis TRUE set power_analysis_mode time_based ##################################################### # link design ############################################## set search_path ../src/hdl/gate ../src/lib/snps . set link_library * core_typ.db read_verilog mac.vg current_design mac link ##################################################### # set transition time / annotate parasitics ##################################################### read_sdc ../src//hdl/gate/mac.sdc set_disable_timing [get_lib_pins ssc_core_typ/*/G] read_parasitics ../src/annotate/mac.spef.gz ##################################################### check_timing update_timing report_timing ##################################################### # read switching activity file ##################################################### read_vcd ../sim/vcd.dump.gz -strip_path tb/macinst ##################################################### # analyze power ##################################################### check_power set_power_analysis_options -waveform_format out -waveform_output vcd update_power report_power quit Other options: Define power analysis options After selecting the power analysis mode, you can use the options supported by the mode to control its behavior using the set_power_analysis_options command. Setting the Concurrent Multirail Power Analysis Mode PrimeTime PX supports concurrent power analysis on multiple power rails. This feature improves the performance because, a single run of the update_power command analyzes multiple power rails or power supply nets in the UPF mode, simultaneously. The concurrent multirail power analysis is supported in both averaged and time-based power analysis modes. To enable this feature, set the power_enable_multi_rail_analysis variable to true. Whe