Danfoss丹佛斯Compressor Pack Controller AKC 25H3. Vers. 1.1x. AKA 21 安装指南.pdf

Refrigeration and Air Conditioning Controls Menu operation via AKA 21 ADAP-KOOL® Compressor pack controller - AKC 25H3 Software version 1.1x ADAP-KOOL® Refrigeration Control Systems R E F R I G E R A T I O N A N D A I R C O N D I T I O N I N G System survey ® A refrigerating plant fitted with ADAP-KOOL refrigeration controls will mostly consist of several controllers where each controller will regulate its own refrigeration appliance/cold room. The system has been designed in such a way that contact can be made to each and every controller via a data communication system. One specific controller is selected, and it will now be possible to make settings and readouts for this unit. Operation The individual controllers can be operated in two ways: 1. With control panel type AKA 21. Use this document when operation takes place in this way. 2. With PC and system software type AKM. Use another document with literature number RC.8A.G. Validity This menu operation (updated October 2002), applies to AKC 25H3 with the following code number: 084B2039 that is fitted with software version 1.1x. 2 Menu operation RC.8A.F2.02 © Danfo