Danfoss丹佛斯Controllers for controlling evaporators AKC 114P and AKC 115P version 1.5x. AKA 21 安装指南.pdf

Menu operation via AKA 21 ADAP-KOOL® Controller for controlling evaporators AKC 114P and 115P Software version 1.5x RC.8A.N1.02 09-2000 System survey ® A refrigerating plant fitted with ADAP-KOOL refrigeration controls will mostly consist of several controllers where each controller will regulate its own refrigeration appliance/cold room. The system has been designed in such a way that contact can be made to each and every controller via a data communication system. One specific controller is selected, and it will now be possible to make settings and readouts for this unit. Operation The individual controllers can be operated in two ways: 1. With control panel type AKA 21. Use this document when operation takes place in this way. 2. With PC and system software type AKM. Validity This menu operation was worked out in September 2000 and applies to AKC 114P and AKC 115P with the following code numbers: 084B6182 (AKC 114P) 084B6183 (AKC 115P) that are fitted with software version 1.5x. 2 Menu operation RC.8A.N1.02 © Danfoss 09/2000 AKC 114P-115P Version 1.5x Select a controller All controllers that are connect