Schneider Electric施耐德Safety Guide - 120 V Li-Ion Easy UPS On-line安装和用户指南(英语).pdf

Important Safety Instructions SAVE THIS GUIDE This Safety Guide contains important instructions that should be followed during installation and maintenance of the APCTM by Schneider Electric equipment. It is intended for Schneider Electric customers who setup, install, relocate, or maintain Schneider Electric equipment. Refer to the product manual for more information. Read, understand, and follow ALL safety instructions contained in this guide. Failure to follow safety instructions and warnings could result in equipment damage, serious injury, or death. Changes and modifications to this unit not expressly approved by Schneider Electric IT Corporation could void the warranty. Product Handling Guidelines 18 kg 18-32 kg 32-55 kg 55 kg 40 lb 40-70 lb 70-120 lb 120 lb • Do not work alone under hazardous conditions. • The equipment is intended for indoor use only. • Do not operate the unit in direct sunlight, in contact with fluids, or where there is excessive dust or humidity. • Be sure the air vents on the UPS are not blocked. • Allow adequate space for proper ventilation. • The equipment is heavy. Always practice safe lifting techniques adequate for the weight of the equipment. • Always install UPS at the bottom in rack-mount configurations. • Always install peripheral equipment above the UPS in rack-mount configurations. Electrical safety • Adhere to all national and local electrical codes. • Do not handle any metallic connector before power has been disconnected. • For models with a hardwired input, the connection to the branch circuit (mains) must be performed by a qualified electrician. • 230 V models only: In order to maintain compliance with the EMC directive for products sold in Europe, output cords attached to the UPS must not exceed 10 meters in length. • The protective earth conductor for the UPS carrie