ZOOM声乐乐器G1 FOUR G1X FOUR B1 FOUR B1X FOUR V2.0 Supplementary Manual说明书用户手册.pdf

Version 2.0 Supplementary Manual The following functions have been added and changed in firmware version 2.0. Changing the looper position The looper can now be placed either before or after the effect. By changing the looper position to before the effect, the looped sound of a performance can be used to craft the sound without continuing to play. 1. Activate the looper. Press Patch memory ・ Looper Looper Return to previous mode: Press Effect 2. Change the looper position. Turn ・ Setting Explanation Pre The looper is positioned before the effects. Post The looper is positioned after the effects. NOTE Changing the recording time, loop or position or tempo will clear any loop that has been recorded. HINT The tempo (BPM) setting available up to firmware version 1.1 can be changed using the rhythm or from SETTING SETUP. Setting value display during rhythm playback Rhythm settings can now also be checked during rhythm playback. Before Version 1.1 After Version 2.0 Stopped Playing Playing/stopped © 2019 ZOOM CORPORATION Z2I-3831-01