SAE AMS 6370R-2020 钢，棒，锻件和环0.95 Cr-0.20 Mo (0.28-0.33 C)(SAE 4130) teel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130).pdf

AEROSPACE AMS6370 TM REV.R INTERNATIONAL, MATERIAL SPECIFICATION Issued 1939- 12 Revised 2020-07 Superseding AMS6370P Steel , Bars, Forgi ngs, and Rings 0 .95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) (Composition s imilar to UNS G41300) RATIONALE AMS6370R results from a Five-Year Review and update of this specification that revises analytical methods (3.1 ), macrostructure (3 .3.1.1), hardenability (3.3.3), decarburization (3 .3.4 .4), and quality (3.4.2), prohibits unauthorized exceptions (3.6), and revises repo同ing (4.4.1 , 4.4.4) and marking (5.2 .1 ). 1. SCOPE 1.1 Form This specification covers an aircraft-qual ity, low-alloy steel in the form of bars, forg ings, flash welded rings , and stock for forging or flash welded rings. 1.2 Application These products have been used typically for parts, 0.50 inch (12.7 mm) and under in section thickness at time of heat treatment, requiring a through-hardened steel capable of developing hardness as high as 35 HRC when hardened and tempered, and also pa时s of greater thickness but requiring proportionately lower hardness, but usage is not limited to such applications. 2. APPLICAB LE DOCUMENTS The issue of th