压铸产品缺陷及改善方法.pptxVIP

压铸产品缺陷及改善方法第1页/共41页 Fe2You can’t correct and control defects without first measuring and reporting them要改善缺陷, 必須先行紀錄, 統計及分析 You have to install a scrap reporting system 設定一個紀錄系統 It should be posted on the bulletin board so everyone  can see it 應在當眼處張貼, 讓大家一起 參與 Basic procedure 基本方法第2页/共41页 Fe3You have to install a rating system to check whether the defect problems are getting better or worse.制定評估級別, 以了解問題是否改善中 Basic procedure 基本方法 It must categorize scrap 必須將廢品分類By defect type 缺陷種類By part number 零件號By die 模具編號By shift 班次By ma