涂料知识讲座.pptVIP

Film Build Defined as the amount of material left on a surface after the solvent has evaporated. Measured in mils or microns. 測量精度千分之一或微米 Wet mils - at application Dry mils - after oven cure Film build is affected by: Atomizing air Fluid delivery Viscosity of Paint Operator Technique - line speed vs spray gun set up 第三十一页，共五十页。 Problems with Film Build Dry Film Build too High: Blistering 水泡 Cracking 斷裂 Orange Peel 橘子皮 Dry Film Build too Low: Chalking漏黑 Chipping雜質 Fading褪色 Gloss Retention保持光澤 第三十二页，共五十页。 Dell- Mystic Silver XPM 21330 Monocoat Operation Instruction (Substrate: Plastic) Pretrea