Tektronix泰克Model 7707 Differential Multiplexer Card Users Guide for use with the 2700, 2701, or 2750用户说明书用户手册.pdf

Model 7707 User’s Guide PA-770 Rev. B / 8-03 The Model 7707 can be used with Keithley Models 2700, 2701, and 2750. All references to the Model 27xx apply to the Models 2700, 2701, and 2750. A G R E A T E R M E A S U R E O F C O N F I D E N C E Safety Precautions The following safety precautions should be observed before using Operators of this product must be protected from electric shock at this product and any associated instrumentation. Although some in- all times. The responsible body must ensure that operators are pre- struments and accessories would normally be used with non-haz- vented access and/or insulated from every connection point. In ardous voltages, there are situations where hazardous conditions some cases, connections must be exposed to potential human con- may be present. tact. Product operators in these circumstances must be trained to This product is intended for use by qualified personnel who recog- protect themselves from the risk of electric shock. If the circuit is nize shock hazards and are familiar with the safety precautions re- capable of operating at or above 1000 volts, no conductive part of quired to avoid possible injury. Read and follow all installation, the circuit may be exposed. operation, and maintenance information carefully before using the Do not connect switching cards directly to unlimited power circuits. product. Refer to the manual for complete product specifications. They are intended to be used with impedance limited sources. If the product is used in a manner not specified, the protection pro- NEVER connect switching car