施耐德BCPM Modbus 存储器清单.pdfVIP

BCPM MODBUS REGISTER LIST 63230-216-266A1 LEGEND R/W: R = Read-Only R/W = Read from float or integer format, Write to integer format only W = Write-Only NV: NV = Value is stored in non-volatile memory V = Value is volatile SQD ID 1517x: Y = Parameter is valid for this ID N = Parameter is invalid for this ID Scale Reg: V = Voltage W = Power E = Energy I = Current val = scale is fixed at value shown. If no value shown, it is assumed to be 0. Modbus Addresses There are 2 Modbus addresses associated with the BCPM - one address for each set of 2 CT strips and set of 4 AUX inputs. The primary Modbus address is set with the main PCB DIP switches; The secondary address is always the primary addess + 1. The Modbus Map detailed here is repeated in its entirety for both addresses. Supported Commands Read Holding Register (03h) Preset Single Register (06h) Preset Multiple Registers (10h) Report Slave ID (11h) Integer vs. Floating Point Registers Integer format registers represent the data as 16 bit signed integer values. Float format registers represent the same data as 32-bit floating point values. Floats All floating point variables are read-only. Floating point registers are packed as follows: Float MSB BYTE3 BYTE2 LSB Modbus MSW MSB LSB Modbus LSW MSB LSB Example: For a floating point value of 3.14159, the encoded 32-bit float value is 0x40490FD0. Modbus MSW = 0x4049 Modbus LSW = 0x0FD0 Integers Integer format