施耐德ION8600系列关口表8600_Installation_Instructions.pdfVIP

® PowerLogic ION8600 Metering Control Device Installation Guide November 2006 Danger This symbol indicates the presence of dangerous voltage within and outside the product enclosure that may constitute a risk of electric shock, serious injury or death to persons if proper precautions are not followed. Caution This symbol alerts the user to the presence of hazards that may cause minor or moderate injury to persons, damage to property or damage to the device itself, if proper precautions are not followed. Note This symbol directs the user’s attention to important installation, operating and maintenance instructions. Installation Considerations Installation and maintenance of the ION8600 meter should only be performed by qualified, competent personnel that have appropriate training and experience with high voltage and current devices. The meter must be installed in accordance with all local and national electrical codes. DANGER Failure to observe the following instructions may result in severe injury or death. During normal operation of the ION8600 meter, hazardous voltages are present on its terminal strips, and throughout the connected potential transformer (PT), current transformer (CT), digital (status) input, control power and external I/O circuits. PT and CT secondary circuits are capable of generating lethal voltages and currents with their primary circuit energized. Follow standard safety precautions while per- forming any installation or service work (i.e. removing PT fuses, shorting CT secondaries, etc). The terminal strips on the meter base should not be user-accessible after installation. Do not use digital output devices for primary protection functions. These include applications where the devices perform energy limiting functions or provide protection of people from injury. Do