TLE4263GM 英飞凌芯片 INFINEON 中文版规格书手册.pdfVIP

OPTIREG™ Linear TLE4263 5 V low drop fixed voltage regulator Features • Output voltage tolerance ≤ ±2% • 200 mA output current capability • Low-drop voltage • Very low standby current consumption • Overtemperature protection • Reverse polarity protection • Short-circuit proof • Adjustable reset threshold • Watchdog • Wide temperature range • Suitable for use in automotive electronics • Green Product (RoHS compliant) Potential applications General automotive applications. Product validation Qualified for automotive applications. Product validation according to AEC-Q100/101. Description The OPTIREG™ Linear TLE4263 is a 5 V low drop voltage regulator in a SMD package PG-DSO-14, PG-DSO-20, or PG-DSO-8. The maximum input voltage is 45 V. The maximum output current is 200 mA. The IC is short-circuit proof and incorporates temperature protection which turns off the IC at overtemperature. Data Sheet 1 Rev. 3.0 /OPTIREG-Linear 2018-10-04 OPTIREG™ Linear TLE4263 5 V low drop fixed voltage regulator The IC regulates an input voltage V in the range between 6 V and 45 V to an output voltage to V = 5.0 V. A I Q,nom reset signal is generated for an output voltage of VQ,rt 4.5 V. This voltage threshold can be decreased to 3.5 V by external connection of a voltage divider. The reset delay can be set externally by a capacitor. The integrated watchdog logic supervises the connected microcontroller. The IC can be switched off via the inhibit input, which causes the current consumption to drop from 900 µA to typical 0 µA. Type Package