Research Proposal 的模板、写作建议以及样本 计算机.pdf

Research Proposal N. Mavaddat Department of Computer Science and Software Engineering The University of Western Australia Crawley, W.A. 6009 April 2002 A. Proposed Study 1. Title Automatic Determination of Vanishing Points and Geometric Cues for Single View Rectification and Metrology. 2. Contribution From a single two-dimensional image of a three-dimensional object or scene it is possible to extract substantial information about the original object or even partially reconstruct the image of the object from a different viewing angle.[4] This has many applications in the fields of architecture, archaeology, forensic science and many others. This analysis can provide, in the case of metrology, measurement of the original scene, and in the case of rectification, the necessary information to construct a virtual model of the scene. A critical part of the analysis process is to accurately identify attributes of interest. One such attribute of interest are the ‘vanishing points’ of a scene. These are defined as points at which the extensions of parallel lines appear to converge in the perspective view of the image. In practice the detection of the vanishing points is made by visual inspection of the image and is both cumbersome and not very accurate. An automatic method of the vanishing point detection would eliminate the subjective inspection of the image and expedite the process. In my Honours project I was able to advance a method for automatic detection of the vanish- ing points through the combination of image analysis techniques and projective geometry. The method was successfully applied t