TC24C08两线EEPROM存储芯片.docxVIP

TC24C08A TC24C08A page1 page1 Two-Wire Serial EEPROM 4K, 8K and 16K (8-bit wide) FEATURES Low voltage and low power operations: TC24C04A/08A/16A: V CC = 1.8V to 5.5V Maximum Standby current 1μA (typically 0.02μA and 0.06μA @ 1.8V and 5.5V respectively). 16 bytes page write mode. Partial page write operation allowed. Internally organized: 512 x 8 (4K), 1024 x 8 (8K), 2048 x 8 (16K). Standard 2-wire bi-directional serial interface. Schmitt trigger, filtered inputs for noise protection. Self-timed Write Cycle (5ms maximum). 1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) Compatibility. Automatic erase before write operation. Write protect pin for hardware data protection. High reliability: typically 1, 000,000 cycles endurance. 100 years data retention. Industrial temperature range (-40o C to 85o C). Standard 8-lead DIP/SOP/MSOP/TSSOP/DFN and 5-lead SOT-23/TSOT-23 Pb-free packages. DESCRIPTION The TC24C04A/08A/16A series are 4,096/8,192/16,384 bits of serial Electrical Erasable and Programmable Read Only Memory, commonly known as EEPROM. They are organized as 512/1,024/2,048 words of 8 bits (1 byte) each. The devices are fabricated with proprietary advanced CMOS process for low power and low voltage applications. These devices are available in standard 8-lead DIP, 8-lead SOP, 8-lead TSSOP, 8-lead DFN, 8-lead MSOP, and 5-lead SOT-23/TSOT-23 packages. A standard 2-wire serial interface is used to address all read and write functions. Our extended V (1.8V to 5.5V) devices enables wide spectrum of applications. PIN CONFIGURATION range CC Pin Pin Name A2, A1, A0 SDA SCL WP NC Pin Function Device Address Inputs Serial Data Input / Open Drain Output Serial Clock Input Write Protect No-Connect All these packaging types come in conventional or Pb-free certified. TC24C04A/08A/16A A018 A0 1 8 VCC A1 2 7 WP SCL 1 5 A2 3 6 SCL GND 2 GND 4 5 SDA SDA 3 4 WP 8L DIP 8L SOP 8L MSOP 8L TSSOP 8L DFN  5L SOT-23 5L TSOT-23 VCC ABSOLUTE MAXIMUM RATINGS Industrial operating temperature: S