惠普存储精华培训-day 3.pptx

HPUX现场实用技能培训Day 3Qian YunSWAT Team 2Agenda – Day3SANEVAXP 3SAN 4SAN TopologiesThree connection topologies outlined by the Fibre Channel standard:Point-to-point (FC-P2P)Arbitrated Loop (FC-AL)Switched Fabric (FC-SW)You can distinguish between the different topologies by two criteria:1) Do we have a loop?2) Is there a switch connected?(*) - also known as direct fabric attach (DFA) 5Private LoopThe private loop can accommodate up to 126 NL_portsA private loop does not contain an FL_portContains only devices which are not fabric-awareCannot communicate with fabric devices TxRxRxTxServerTape LibraryHUBNL-portNL-port 6Fibre Channel HUBSwitched Fabric TopologyNode BN_Port 0F_PortTransmitterReceiverN_Port 1TransmitterReceiverNode AF_PortReceiverTransmitterNode ANL_PortTxRxFL_Port TransmitterReceiverFC_ALNL_PortsfabricNode BNL_Port 0RxTxNode DNL_Port 0TxRxN_Port 0TransmitterReceiver 7Public LoopIf there is an active FL_port on the loop, it is considered a public loop. The public loop can accommodate up to 126 NL_ports and one FL_port The FL_port extends the number of nodes for communication. Using this port, a private loop can be connected to the public loop. 8Fabric addressingDomainAreaPortFabric/Switched (FLOGI)Public loop (FLOGI + loop)Private loop (No FLOGI)N-PortNL-PortQL-Port8-bits8-bits8-bits 99B-Series SAN switch Fibre Channel device addressesNN NN 00 “NN NN 00” is the genericAddress of any Fabric Device that has logged into the Fabric (FLOGI).Device FLOGI response assigns a 24-bit addressNative Mode has 2nd byte 1st nibble with a 1.Core PID mode uses entire 2nd byte=AREA CORE PID Fabric AddressNative ModeDomain Area Port(DEV) 01 11 00 (Port 1) 02 1C 00 (Port 12) CORE_PID ModeDomain Area Port(DEV) 01 01 00 (Port 1) 02 0C 00 (Port 12) 02 10 00 (Port 16) 01 33 00 (Port 51) 1010Port addressing. 11Shared area numbers. 12级联考虑的内容 Domain