基于元胞自动机的三维复杂槽型车刀片设计及其断屑研究的开题报告.docxVIP

基于元胞自动机的三维复杂槽型车刀片设计及其断屑研究的开题报告 摘要： 随着制造业的快速发展，刀具设计和制造技术也不断的进步和完善。而刀片的设计是刀具制造中不可或缺的一部分，因为刀片的质量决定着切削加工效果的好坏。为了提高槽型车刀片的性能和效率，本文提出了一种基于元胞自动机的三维复杂槽型车刀片设计方案。 本文围绕三维复杂槽型车刀片的设计和制造展开研究。首先对刀片的相关知识和槽型车的工艺流程进行了梳理和分析，然后利用元胞自动机模拟了刀片的3D设计过程。通过模拟结果，优化刀片的设计参数，得到了槽型车刀片的最优设计方案。此外，本文还对刀片的断屑现象进行了研究，对切削过程中产生的不同类型的断屑进行了分析和讨论。 通过以上的研究，本文总结出了一套基于元胞自动机的三维复杂槽型车刀片设计及其断屑研究方案。该方案可以为刀具制造企业提供刀片的优化设计思路和制造方案，同时也可以为学术界提供一套全新的基于元胞自动机的三维设计和仿真方法。 关键词：元胞自动机；三维复杂槽型车刀片；断屑研究；刀削加工。 Abstract: With the rapid development of manufacturing industry, tool design and manufacturing technology have been continuously improved. Blade design is an indispensable part of tool manufacturing because the quality of the blade determines the cutting performance. To improve the performance and efficiency of the slotting knife blade, this paper proposes a design scheme of a three-dimensional complex slotting knife blade based on cellular automata. This paper focuses on the design and manufacturing of three-dimensional complex slotting knife blades. Firstly, the relevant knowledge of the blade and the process flow of the slotting were sorted out and analyzed. Then, the blades 3D design process was simulated using cellular automata. Based on the simulation results, the design parameters of the blade were optimized to obtain the optimal design scheme for the slotting knife blade. In addition, this paper also studied the phenomenon of the blade breaking and analyzed and discussed the different types of chips produced during the cutting process. Through the above research, this paper summarizes a set of design and research schemes for a three-dimensional complex slotting knife blade based on cellular automata. This scheme can provide a design concept and manufacturing plan for blade manufacturing enterprises, and also provide a new set of three-dimensional design and simulation methods based on cellular automata for the academic community. Keywords: Cellular automata; three-dimensional complex slotting knife blade; chip research; cut