Brinno缩时拍TLC120 CAMERA FIRMWARE (fw E.04.P)说明书用户手册.pdf

Camera Time Lapse Camera Firmware TLC120 Upgrade version EN A1 Jul. 18, 2017 Before doing camera rmware upgrade process, please follow below steps and unzip the rmware upgrade package. Step 1 Turn o camera power, remove the SD card from camera and insert into a PC. Power OFF Step 2 Copy and save the le TLC120FW.BIN into 120TLC00 folder in the SD card (120TLC00 folder should locate in the DCIM folder) DCIM ** If the SD card doesn’t have a folder named 120TLC00 in the DCIM folder, 120TLC00 please create those folders by yourself. TLC120FW.BIN Step 3 Insert SD card into camera and turn on camera power. Insert Power ON Step 4 Firmware upgrade is processing, the LED indicator will blink green and orange color in several seconds, please do not turn o power Power on 2 s or remove SD card. Upgrade completed, the LED will stop blinking and turn to green. Upgrade 10 s Restart Done Please connect your smart phone to camera to make sure the upgrade was successfully completed. Finished HOW TO CHECK CAMERA FIRMWARE VERSION? 1. Open Brinno Camera app 2. Go to Menu Settings 3. Go to General Settings 4. Scroll down to verify camera version