- 4
- 0
- 约3.74万字
- 约 20页
- 2023-08-22 发布于未知
- 举报
SD-Memory Card Specifications / Part 1. Physical Layer Specification; Version 1.0
SPI Mode
7 SPI Mode
7.1
Introduction
The SPI mode consists of a secondary communication protocol which is offered by Flash-based SD
Memory Cards. This mode is a subset of the SD Memory Card protocol, designed to communicate
with a SPI channel, commonly found in Motorola’s (and lately a few other vendors’) microcontrollers.
The interface is selected during the first reset command after power up (CMD0) and cannot be
changed once the part is powered on.
The SPI standard defines the physical link only, and not the c
您可能关注的文档
- 波形发生器——仅供学习交流,严禁用于商业用途.docx
- YJD1602A-2确认、说明书——仅供学习交流,严禁用于商业用途.docx
- XTAL16MHZ 7B--P07——仅供学习交流,严禁用于商业用途.docx
- XL24L01-D01-V1.1——仅供学习交流,严禁用于商业用途.docx
- WPR1516概述——仅供学习交流,严禁用于商业用途.docx
- Wireless_keyboard_using_nRF24Ex——仅供学习交流,严禁用于商业用途.docx
- WI-IQ006 盐雾实验WI R2——仅供学习交流,严禁用于商业用途.docx
- White_Paper-Interfacing_a_nRF24L01_to_a_Philips_Twin-Eye_Las——仅供学习交流,严禁用于商业用途_27022006.docx
- W-DXP创建元件——仅供学习交流,严禁用于商业用途.docx
- TL084 中文版——仅供学习交流,严禁用于商业用途.docx
原创力文档

文档评论(0)