ABB Quick guide[XX] Video Indoor Station 4.3 Handsfree M2248.-W 手册(英语)说明书.pdf

Video Indoor Station 4.3 Surveillance button Setting button Terminal resistor switch ■ In standby status, press to monitor the default outdoor 7 ■ In standby status, press to enter the system settings. 4 In video installations or mixed audio and video installations, station. ■ During a call request, communication, or surveillance, the switch must be set as RC on on the last device of the Control elements ■ During a call request, if One on mode is used on the press to set the volume, colour, contrast and brightness. line (ON=RC on). 1 4.3” color display 4 (mini) system controller, only the primary indoor station 8 Microphone 5 a1, b1 = bus connector Call button can show the image, for the secondary indoor station this 9 Speaker 6 a potential free contact, such as a doorbell pushbutton