基于盐岩损伤机理的深部巨厚盐层钻井液密度设计方法.docxVIP

第30卷 第5期 石 油 学 报 Vol.30 No.5 2009年9月 ACTA PETROLEI SINICA Sept. 2009 文章编号：0253-2697(2009)05-0778-04 基于盐岩损伤机理的深部巨厚盐层钻井液密度设计方法 侯 冰 陈 勉1 金 衍 杨恒林2 张广清 (1. 中国石油大学石油工程教育部重点实验室 北京 102249; 2.中国石油天然气集团公司钻井工程技术研究院 北京 100097) 摘要：为防止钻井过程中盐层蟠变发生塑性变形而导致卡钻等事故，传统的方法是建立蠕变本构方程及用实验确定蠕变参数，但 是得到的控制盐层蠕变的钻井液密度不能很好地反映实际钻井情况。因而提出一种控制近井筒盐岩不产生扩容损伤变形的新方 法，并利用该方法设计了深部巨厚盐层钻井液密度。通过室内试验分析了盐岩损伤变形过程中的声发射信号，确定了盐岩的扩容 损伤边界。对于深部盐岩钻井工程中的井壁稳定性问题，根据八面体剪应力准则，井壁盐岩的应力状态控制在扩容损伤边界以内， 设计了深部盐层安全钻井液密度窗口。与实际钻井对比分析表明，用该方法设计的钻井液密度窗口能够保证盐层安全钻井，且方 法简单而有效，便于现场应用。 关键词：深部巨厚盐层；损伤机理；扩容损伤边界；井壁稳定性；钻井液密度；设计方法 中图分类号：TE252 文献标识码：A A method for determining density of drilling fluids used in deep big-thickness salt-bed drilling based on salt rock damage mechanism HOU Bing CHEN Mian JIN Yan YANG Henglin2 ZHANG Guangqing (1.Key Laboratory for Petroleum Engineering of the Ministry of Education,China University of Petroleum,Beijing 102249, China; 2. PetroChina Drilling Engineering Technology Research Institute,Beijing 100097,China) Abstract: In order to prevent stick accidents caused from plastic deformation of salt-bed creep during drilling, the density of drilling fluids in salt formation is commonly calculated using the established constitutive equation and the parameters obtained from experi- ments, which cannot meet the real requirement of drilling fluid. A new approach for controlling the dilatancy damage and deforma- tion at the nearside of borehole was presented and used to calculate the density of drilling fluid for deep big-thickness salt formation. The acoustic emission signal generated from salt rock damage and deformation was analyzed in laboratory to determine the dilatancy border in the damaged salt-formation. The borehole of deep salt formation is stable only when the octahedral shear stress is below the dilatancy boundary. A comparison