高铬铁素体耐热钢蠕变机理和氧化行为的研究的中期报告.docxVIP

高铬铁素体耐热钢蠕变机理和氧化行为的研究的中期报告 摘要： 本次研究通过实验研究了高铬铁素体耐热钢在高温下的蠕变机理和氧化行为，并通过分析实验结果得到了以下结论： 1. 在高温下，高铬铁素体耐热钢会发生显著的蠕变变形，且随着温度的升高和应力的增加，蠕变速率也会增加。 2. 高温蠕变的主要机制为晶粒滑移和晶界滑移，并且晶界滑移是主要的塑性变形机制。 3. 高铬铁素体耐热钢在高温下的氧化行为与温度和氧化时间有关，且会随着时间的增长而加剧。 4. 基于实验结果，可以得出高铬铁素体耐热钢在高温下的蠕变机理和氧化行为的基本特征，这对于改进耐热钢的设计和使用具有重要的参考价值。 关键词：高铬铁素体耐热钢；蠕变变形；氧化行为；机理分析 Abstract： In this study, the creep mechanism and oxidation behavior of high chromium ferritic heat-resistant steel at high temperature were studied by experimental methods, and the following conclusions were drawn based on the analysis of the experimental results: 1. At high temperature, the high chromium ferritic heat-resistant steel undergoes significant creep deformation, and the creep rate increases with increasing temperature and increasing stress. 2. The main mechanism of high temperature creep deformation is grain slip and boundary slip, and boundary slip is the main plastic deformation mechanism. 3. The oxidation behavior of high chromium ferritic heat-resistant steel at high temperature is related to temperature and oxidation time, and it will worsen with increasing time. 4. Based on the experimental results, the basic characteristics of the creep mechanism and oxidation behavior of high chromium ferritic heat-resistant steel at high temperature can be obtained, which is of great reference value for improving the design and use of heat-resistant steel. Keywords: high chromium ferritic heat-resistant steel; creep deformation; oxidation behavior; mechanism analysis