海水冷却泵用Monelk500合金大型泵轴成形工艺研究的中期报告.docxVIP

海水冷却泵用Monelk500合金大型泵轴成形工艺研究的中期报告 摘要： 本文介绍了海水冷却泵用Monelk500合金大型泵轴成形工艺的研究进展，包括材料特性、设计要求、加工工艺及检验及评定方法等四个方面。在材料特性方面，Monelk500合金具有优异的抗海水腐蚀性能和机械性能，适用于海水冷却泵的大型泵轴；在设计要求方面，为提高泵轴的机械性能和疲劳寿命，设计了合理的几何形状和尺寸；在加工工艺方面，采用了热处理、锻造和精加工等工艺流程，可确保泵轴的化学成分均匀，其组织结构致密，且表面光洁度高；在检验及评定方法方面，建立了完整的质量检验体系，包括金相检查、化学成分分析、硬度测量、磁粉探伤等方法。 关键词：海水冷却泵；Monelk500合金；泵轴；成形工艺；检验评定。 Abstract: This paper introduces the research progress of the forming process of the large-scale pump shaft of Monelk500 alloy used in seawater cooling pumps, including material characteristics, design requirements, processing technology and inspection and evaluation methods. In terms of material characteristics, Monelk500 alloy has excellent resistance to seawater corrosion and mechanical properties, which is suitable for the large pump shaft of seawater cooling pumps; in terms of design requirements, reasonable geometric shapes and sizes are designed to improve the mechanical properties and fatigue life of the pump shaft; In terms of processing technology, heat treatment, forging and precision machining are used to ensure the uniform chemical composition of the pump shaft, its dense structure, and high surface finish; In terms of inspection and evaluation methods, a complete quality inspection system is established, including methods of metallographic inspection, chemical composition analysis, hardness measurement, and magnetic particle inspection. Keywords: Seawater cooling pumps; Monelk500 alloy; Pump shaft; Forming process; Inspection and evaluation.