纳米粒子射流微量润滑磨削区流场建模仿真与实验研究的中期报告.docxVIP

纳米粒子射流微量润滑磨削区流场建模仿真与实验研究的中期报告 【摘要】 本文介绍了基于CFD模拟的纳米粒子射流微量润滑磨削区流场建模仿真与实验研究的中期进展。详细描述了建模方法和实验装置，分析了仿真结果，并进行了实验验证和数据对比。结果表明，纳米粒子射流微量润滑对磨削区流场产生显著影响，可以大大降低磨削过程中的磨损和摩擦，提高磨削效率和工件表面质量。本研究为纳米粒子射流微量润滑的使用提供了可靠的理论和实验基础。 【关键词】 纳米粒子射流；微量润滑；磨削；区流场；建模仿真 【Abstract】 This paper presents the mid-term progress of the CFD simulation-based modeling and experimental study of the flow field in the nano-particle jet lubrication-assisted micro-machining. The modeling method and experimental setup were described in detail, and the simulation results were analyzed. The experimental validation and data comparison were also conducted. The results show that the nano-particle jet lubrication-assisted micro-machining significantly affects the flow field in the machining zone, which can greatly reduce wear and friction during the machining process, improve machining efficiency and workpiece surface quality. This study provides a reliable theoretical and experimental basis for the use of nano-particle jet lubrication. 【Keywords】 Nano-particle jet; Lubrication-assisted; Machining; Flow field; Modeling and simulation