飞轮储能电机定子灌封的设计与应用.pdfVIP

2023年第3期 第58卷(总第232期) (EXPLOSION-PROOF ELECTRIC MACHINE) 彷烁讫机 飞轮储能电机定子灌封的设计与应用 竺东杰 (武汉扬华电气股份有限公司，湖北武汉430205) 摘要基于飞轮储能电机功率密度高、需要真空环境运行等特点，为了保证定子的绝缘效 果和结构强度以及利于定子的温升控制，决定对其采用灌封工艺处理。首先调研并选取了合适的 灌封胶，然后根据实际工况设计了两种不同的定子灌封工装,还理清了从前期准备到开始灌封以 及后处理等方面的各个关键点。现已多次在飞轮储能电机的定子灌封实践中得到了有效验证，对 其他类型电机的灌封也有参考价值。 关键词 飞轮储能电机滇空环境;绝缘效果;灌封工装 DOI ：10.3969/J. ISSN. 1008-7281.2023.03.03 中图分类号:TM305. 1文献标识码:A 文章编号:1008-7281 (2023) 03-0010-004 Design and Application of Stator Potting Technology for Flywheel Energy Storage Motor Zhu Dongjie (Wuhan Yanghua Electric Co.,Ltd.,Wuhan 430205, China) Abstract Based on the characteristics of high power density and the vacuum environment operation requirement, the flywheel energy storage motor has adopted the potting technology to ensure the insulation effect, structural strength and temperature-rise control of the stator. First­ ly ,the suitable potting glue was investigated and selected, and then two different stator potting toolings were designed according to the actual working conditions. The various key points were clarified from the preliminary preparation to the potting start and potting post-processing. It has been effectively verified in the practice potting for many times, which has some reference for potting of other types of motors. Key words Flywheel energy storage motor； vacuum environment； insulation effect； pot­ ting tooling 外，定子的散热常常利用在机壳结构上做水冷或 0引言 风冷等处理,但在机壳内由于真空环境下的定子 飞轮储能电机在运行过程中需要真空环境来 端部散热效率较差,这就对有着较高功率密度的 降低高速旋转飞轮转子的风摩损耗、