jdy 25m超级蓝牙模块手册1 722 faq.pdfVIP

  • 22
  • 0
  • 约1.02万字
  • 约 5页
  • 2023-10-23 发布于北京
  • 举报
Q1: In AT+ROLE work mode, after the APP is connected, the module can only receive MESH data but canno d MESH data. A: It supports sending MESH data in the APP connection state. S e the APP enters the transparent transmission state after connection, when it needs to send MESH data in the APP connection state, it needs to pull down PWRC pin to send MESH instruction. Q2: If there is a need for a long distance transmission, put JDY-24M every tens of meters, will th work transmission distance be extended?

文档评论(0)

1亿VIP精品文档

相关文档