开放式加工中心数控程序译码算法研究及仿真的中期报告.docxVIP

开放式加工中心数控程序译码算法研究及仿真的中期报告 摘要： 本文对开放式加工中心数控程序译码算法研究及仿真进行了中期报告。首先介绍了开放式加工中心的基本概念及其数控系统工作原理，然后详细阐述了数控程序的格式及其编码规则，包括程序段的划分、程序块的编码方式等。接着，本文分析了数控程序的译码算法，并说明了关键技术点，如处理程序块引用、程序地址转换、剪切平移等。最后，本文进行了仿真实验，并给出了实验结果及分析。 关键词：开放式加工中心、数控系统、数控程序、译码算法、仿真 Abstract： This report presents a mid-term report on the research and simulation of the decoding algorithm of numerical control programs for open machining centers. Firstly, the basic concept of open machining centers and the working principle of their numerical control systems are introduced. Then, the format of numerical control programs and their encoding rules are elaborated, including the division of program segments and the encoding methods of program blocks. Subsequently, the decoding algorithm of numerical control programs is analyzed, and key techniques are explained, such as handling program block references, program address conversion, and shear translation. Finally, simulation experiments are conducted, and the experimental results and analysis are presented. Keywords: open machining center, numerical control system, numerical control program, decoding algorithm, simulation