电力系统交直流潮流的全纯嵌入计算.pdfVIP

2021 年 11 月 电 工 技 术 学 报 Vol.36 No. 21 第 36 卷第 21 期 TRANSACTIONS OF CHINA ELECTROTECHNICAL SOCIETY Nov. 2021 DOI:10.19595/j.cnki.1000-6753.tces.201306 电力系统交直流潮流的全纯嵌入计算 姜 涛 张 勇 李 雪 李国庆 陈厚合 （现代电力系统仿真控制与绿色电能新技术教育部重点实验室（东北电力大学） 吉林 132012 ） 摘要 针对采用牛拉（NR ）法计算电力系统交直流系统潮流存在初值选取和计算量大的不足， 提出一种用于交直流潮流计算的全纯嵌入方法。该方法首先依据全纯函数构造原理，通过嵌入参 数，分别构建全纯交流潮流模型、直流潮流模型及换流站控制模型；然后，基于全纯函数的泰勒 级数展开特性，将非线性全纯潮流方程的求解问题，转换为隐式全纯函数的显式化问题；依据同 次幂系数相等原则，求取泰勒级数展开项的幂级数系数，完成全纯函数的显式化，进而对嵌入参 数赋值，实现交直流潮流的快速求解；最后，通过修改的IEEE 5 节点交直流系统、RTS-96 交直 流系统和波兰电网3012wp 交直流测试系统进行分析和验证，结果表明，所提方法不依赖初值便可 快速、准确地计算出交直流系统潮流，且鲁棒性强，为大规模交直流电网潮流计算提供了新思路。 关键词：交直流系统 电压源型换流器 全纯函数 潮流计算 中图分类号：TM744 A Holomorphic Embedded Method for Solving Power Flow in Hybrid AC-DC Power System Jiang Tao Zhang Yong Li Xue Li Guoqing Chen Houhe (Key Laboratory of Modern Power System Simulation and Control Renewable Energy Technology Ministry of Education Northeast Electric Power University Jilin 132012 China) Abstract In order to address the initial value selection and large calculation amount when Newton Raphson(NR) method is used to calculate AC-DC power flow, this paper proposes a holomorphic embedding method for AC-DC power flow calculation. Firstly, according to the construction principle of holomorphic function, the holomorphic AC-DC power flow model and converter station control model are constructed by embedding parameters. Then, based on the Taylor series expansion characteristics of the holomorphic function, the problem of solving nonlinear power flow equations is transformed into an explicit problem of implicit holomorphic functions. Moreover, according to the principle that the same power co