电流源驱动电路效率提升及损耗分析研究.pdfVIP

2021 年 12 月 电 工 技 术 学 报 Vol.36 Sup.2 第 36 卷增刊2 TRANSACTIONS OF CHINA ELECTROTECHNICAL SOCIETY Dec. 2021 DOI: 10.19595/ki.1000-6753.tces.L90153 电流源驱动电路效率提升及损耗分析研究 桑汐坤 王懿杰 徐殿国 （哈尔滨工业大学电气工程及自动化学院 哈尔滨 150001 ） 摘要 该文对一种新型电流源门极驱动电路的两种不同的工作方式进行研究，为了分析系统 参数对两种工作方式下驱动电路损耗的影响，对电路的工作模态和各部分的功耗进行详细的分析。 此外，还对两种工作方式下驱动电路的损耗进行比较，从系统损耗的角度提出这种电流源门极驱 动电路在两种工作方式下的选择方法。最终，将该电流源驱动电路应用到改进型SEPIC 升压变换 器中，通过实验测试分析了开关管驱动信号的开通关断过程，并与传统 Si8271 电压源驱动做出对 比分析，进一步验证了该电流源驱动电路对于提升系统效率的意义。 关键词：电流源门极驱动 谐振驱动 损耗分析 效率提升 中图分类号：TM46 Research on Loss Analysis and Efficiency Improvement of Current Source Driver Sang Xikun Wang Yijie Xu Dianguo （School of Electrical Engineering Automation Harbin Institute of Technology Harbin 150001 China ） Abstract In this paper, two different working modes of a new current source gate driver were studied. In order to research the influence of the system parameters on the loss of the driving circuit under the two working modes, the working principle of the circuit and the power consumption of each part were analyzed in detail. In addition, the power loss of the driving circuit under the two working modes was compared, and the selection method of the current source gate driver under the two working modes was proposed from the perspective of system loss. Finally, the current source gate driver was applied to a modified SEPIC Boost converter, the turn-on and turn-off process of the switch were analyzed through the experimental test, and the comparative analysis was made with the traditional voltage