Moisture-Sensitive-Devices-(MSD)-Training英文原版PPT课件.pptVIP

Moisture Sensitive Devices (MSD) Training 2ContentsWhat does MSD mean?Component failure caused by moistureSymbol and labelHow to handle with MSD?How to protect with MSD? 3DefinitionDRY PACK – The components packed inside a Moisture Barrier Bag with desiccant material, a Humidity Indicator Card and vacuum sealed.HIC – Humidity Indicator CardMSL – Moisture Sensitive LevelMBB – Moisture Barrier BagMSD – Moisture Sensitive DeviceMSID Label – Moisture Sensitive Identification Label 4Component failure mechanismComponent OKComponent absorbs moisture after packing openingMoisture expands under reflow processComponent damage 5Moisture Classification Level and FLMoisture Classification Level and Floor Life 6Symbol and LabelsMoisture sensitive symbolThis symbol indicates that devices are moisture sensitive to a level from 2 to 6 and it appears on all moisture sensitive caution labelsMoisture sensitive symbol 7Symbol and LabelsMoisture sensitive Identification (MSID) labelThis label should be on the lowest level shipping container to indicate that moisture sensitive devices are in the container.CAUTIONMOISTURE SENSITIVEMSID Label 8Symbol and LabelsMoisture sensitive labelLevel 1 labelThis label is required only if the classification temperature is 235C and shall be placed on the lowest level shipping container to identify the devices as “NOT MOISTURE SENSITIVE”Moisture sensitive caution label for level 1 9Symbol and LabelsMoisture sensitive labelLevels 2-5a The moisture-sensitive caution label shall be used for levels 2, 2a, 3, 4, 5 and 5a as defined by J-STD-020. This label is required on the moisture barrier bag and will provide the following information:Moisture classification level.The calculated shelf life in the sealed bagThe peak package body temperature (Top surface) used for device classification as defined by J-STD-020.The floor life of the device at 30oC/60%RH as defined by J-STD-020.The bag seal date utilizing “MMDDYY”, “YYWW” or equivalent format. An acceptable alt