汇编_C语言程序设计下载-支持高清浏览-max文档.pptxVIP

汇编、C语言程序设计 例1 . equ x , 45 /* x=45 */ . equ y , 64 /*y=64 */ . equ stack_top , 0x1000 /*define the top address for stacks */ . global _start . text _start : /*code start */ mov sp , #stack_top mov r0 , #x /*put x value into R0 */ str r0 , [sp] /*save the value of R0 into stacks*/ mov r0 , #y /*put y value into R0 */ ldr r 1 , [sp] /*read the data from stack,and put it into R1 */ add r0 , r0 , r 1 str r0 , [sp] stop : b stop /*end the code ， cycling */ . end 例2 /* x=45 */ /* y=64 */ /* z=87 */ /* code start */ /* put x value into R0*/ /* R0 = R0 8*/ /* put y value into R1 */ /* R2 = (R11) + R0 */ /* put z value into R0 */ /* get low 8 bit from R0 */ /* put y value into R1 */ /* R2 = (R11) + R0 */ /* 堆栈弹出到 R1 */ /* put R2 value into R1 */ /* R2 = (R11) + R0 */ /* end the code ， cycling*/ .equ x, 45 .equ y, 64 .equ z, 87 .global _start .text _start : mov r0, #x mov r0, r0, lsl #8 mov r 1, #y add r2, r0, r 1, lsr #1 mov sp, #0x1000 str r2, [sp] mov r0, #z and r0, r0, #0xFF mov r 1, #y add r2, r0, r 1, lsr #1 ldr r0, [sp] mov r 1, #0x01 orr r0, r0, r 1 mov r 1, R2 add r2, r0, r 1, lsr #1 stop :b stop .end 例3 子程序调用 . global _start . text . equ num , 2 /* Number of entr ies in jump table */ _start : mov r0 , #0 /* set up the three parameters */ mov r 1 , #3 mov r2 , #2 bl ar ithfun c /*call the function */ stop :b stop /*label the function */ /*Treat function code as unsigned integer */ /*If code is = 2 then do operation 0*/ adr r3 , JumpTable /*Load address of jump table */ ldr pc , [r3 ,r0 , lsl#2] /*Jump to the appropriate routine */ ar ithfun c : cmp r0 , #num bhs DoAdd /*Operation 0 , 1 */ /* Return */ /* Operation