(5.9)--Chapter 9 Radiation heat transfe传热学传热学传热学.pptVIP

* * Simplified assumptions: 1 Thermal conductivity of the bridge is constant; 2 Radiation heat transfer between the backfire surface of the bridge and the furnace wall can be ignored; 3 The measured radiation heat flow from the flame in local area to the bridge surface is uniform; 4 Once radiation heat flow is absorbed by the surface, it becomes conduction heat flow parallel to bridge surface and conducting to both sides; 5 The temperature of bridge surface is much lower than flame temperature; 6 Convection heat transfer between bridge surface and the smoke is negligible. On the section at dis