【英语版】国际标准 ISO 9848:2003 EN Photography — Source document microfilms — Determination of ISO speed and ISO average gradient 摄影 原始文件缩微胶片 确定 ISO 速度和 ISO 平均梯度.pdf
- 0
- 0
- 2024-07-10 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 2003-11-19 颁布
- 1、本标准文档预览图片由程序生成,具体信息以下载为准。
- 2、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 3、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 4、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
以下文本介绍内容由我方AI生成,信息仅供参考,如有出入,请以实际为准。
ISO9848:2003ENPhotography—Sourcedocumentmicrofilms—DeterminationofISOspeedandISOaveragegradient是一个关于摄影源文件微缩胶片的标准。这个标准主要涉及到ISO速度和ISO平均梯度的确定。
ISO速度是衡量胶片感光度的标准,它代表了胶片在一定光线条件下能够产生可见图像所需要的曝光量。ISO速度越高,胶片的感光度就越快。而ISO平均梯度则是指微缩胶片在整个影像区域的密度梯度,它反映了胶片的成像质量。
为了确定ISO速度和ISO平均梯度,通常需要进行以下步骤:
1.拍摄微缩胶片的标准光源照片,这些照片应该能够覆盖整个影像区域。
2.使用专业的图像分析软件,测量标准光源照片中不同密度区域的灰度值,并绘制出密度梯度图。
3.根据密度梯度图中的变化趋势,可以大致确定胶片的ISO速度和ISO平均梯度。
需要注意的是,ISO速度和ISO平均梯度的确定需要专业的设备和技能,因此需要由专业人员来进行。不同制造商生产的微缩胶片可能会有不同的性能表现,因此在确定ISO速度和ISO平均梯度时,需要考虑到具体的胶片品牌和型号。
您可能关注的文档
- 国际标准 ISO 9357:1990 EN Equipment for crop protection — Agricultural sprayers — Tank nominal volume and filling hole diameter 作物保护设备 农用喷雾器 储罐公称容积和灌装孔直径.pdf
- 国际标准 ISO 9358:1994 EN 光学和光学仪器 图像形成系统的遮蔽眩光 定义和测量方法 Optics and optical instruments — Veiling glare of image forming systems — Definitions and methods of measurement.pdf
- 国际标准 ISO 9358:1994 EN Optics and optical instruments — Veiling glare of image forming systems — Definitions and methods of measurement 光学和光学仪器 图像形成系统的遮蔽眩光 定义和测量方法.pdf
- 国际标准 ISO 9359:1989 EN 空气质量 用于评估环境空气质量的分层抽样法 Air quality — Stratified sampling method for assessment of ambient air quality.pdf
- 国际标准 ISO 9359:1989 EN Air quality — Stratified sampling method for assessment of ambient air quality 空气质量 用于评估环境空气质量的分层抽样法.pdf
- 国际标准 ISO 936:1998 EN 肉和肉制品 总灰分的测定 Meat and meat products — Determination of total ash.pdf
- 国际标准 ISO 936:1998 EN Meat and meat products — Determination of total ash 肉和肉制品 总灰分的测定.pdf
- 国际标准 ISO 9360-1:2000 EN 麻醉和呼吸设备 用于湿化人体呼吸气体的热量和水分交换器(HMEs) 第1部分:用于最小潮气量为 250 毫升的 HMEs Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 1: HMEs for use with minimum tidal v.pdf
- 国际标准 ISO 9360-1:2000 EN Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 1: HMEs for use with minimum tidal volumes of 250 ml 麻醉和呼吸设备 用于湿化人体呼吸气体的热量和水分交换器(HMEs) 第1部分:用于最小潮.pdf
- 国际标准 ISO 9360-2:2001 EN 麻醉和呼吸设备 用于湿化人体呼吸气体的湿热交换器(HMEs) 第2部分:用于最小潮气量为 250 毫升的气管切开患者的 HMEs Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 2: HMEs for use with tracheostom.pdf
- 国际标准 ISO 9849:2017 EN 光学和光学仪器 大地测量和测量仪器 词汇表 Optics and optical instruments — Geodetic and surveying instruments — Vocabulary.pdf
- 国际标准 ISO 9849:2017 EN Optics and optical instruments — Geodetic and surveying instruments — Vocabulary 光学和光学仪器 大地测量和测量仪器 词汇表.pdf
- 国际标准 ISO 9851:1990 EN 连续机械搬运设备 高架电动单轨输送机 定义和安全规则 Continuous mechanical handling equipment — Overhead electrical monorail conveyors — Definitions and safety rules.pdf
- 国际标准 ISO 9851:1990 EN Continuous mechanical handling equipment — Overhead electrical monorail conveyors — Definitions and safety rules 连续机械搬运设备 高架电动单轨输送机 定义和安全规则.pdf
- 国际标准 ISO 9852:2007 EN 未增塑聚氯乙烯(PVC-U)管材 特定温度下的耐二氯甲烷性(DCMT) 测试方法 Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method.pdf
- 国际标准 ISO 9852:2007 EN Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method 未增塑聚氯乙烯(PVC-U)管材 特定温度下的耐二氯甲烷性(DCMT) 测试方法.pdf
- 国际标准 ISO 9854-1:2023 EN 用于输送流体的热塑性管材 夏比冲击性能的测定 第1部分:一般试验方法 Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 1: General test method.pdf
- 国际标准 ISO 9854-1:2023 EN Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 1: General test method 用于输送流体的热塑性管材 夏比冲击性能的测定 第1部分:一般试验方法.pdf
- 国际标准 ISO 9854-2:2023 EN 用于流体输送的热塑性塑料管——夏佩尔冲击性能的测定——第2部分:不同材料的管材试验条件 Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 2: Test conditions for pipes of various materials.pdf
- 国际标准 ISO 9854-2:2023 EN Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 2: Test conditions for pipes of various materials 用于流体输送的热塑性塑料管——夏佩尔冲击性能的测定——第2部分:不同材料的管材试验条件.pdf
文档评论(0)