【英语版】国际标准 ISO 22772:2020 EN 空间系统 运载火箭 (LV) 与地面电子支持设备 (EGSE) 接口的要求 Space systems — Requirements of launch vehicle (LV) to electrical ground support equipment (EGSE) interfaces.pdf
- 6
- 0
- 2024-07-26 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 2020-07-13 颁布
ISO22772:2020ENSpacesystems—Requirementsoflaunchvehicle(LV)toelectricalgroundsupportequipment(EGSE)interfaces的详细解释如下:
ISO22772是关于空间系统的标准,主要针对火箭或运载火箭与地面电气支持设备(EGSE)接口的要求。此标准主要用于规范这些接口的功能、性能和质量标准。
以下是ISO22772:2020中涉及的主要内容:
1.功能要求:接口必须能够实现预期的功能,例如数据传输、电源分配、信号控制等。
2.性能要求:接口应具有适当的性能指标,以确保在各种条件下都能正常工作。这些指标可能包括响应时间、传输速率、电源质量等。
3.安全性要求:接口必须能够提供足够的安全性保障,以防止意外操作或故障导致人员伤害或财产损失。
4.可用性要求:接口应具有高可用性,即即使在出现故障时也能快速恢复,并确保系统的正常运行。
5.环境适应性要求:接口应能够在不同的环境条件下正常工作,包括温度、湿度、振动、污染等。
6.互换性要求:同一品牌或型号的火箭与EGSE之间的接口应该具有互换性,以方便系统的维护和升级。
ISO22772:2020规定了火箭与EGSE之间的接口需要满足一系列的要求,以确保它们之间的正常通信和协同工作。这些要求对于确
您可能关注的文档
- 国际标准 ISO 22733-2:2023 EN 道路车辆——评估自主紧急制动系统性能的试验方法——第2部分:车辆对行人的制动系统 Road vehicles — Test method to evaluate the performance of autonomous emergency braking systems — Part 2: Car to pedestrian.pdf
- 国际标准 ISO 22733-2:2023 EN Road vehicles — Test method to evaluate the performance of autonomous emergency braking systems — Part 2: Car to pedestrian 道路车辆——评估自主紧急制动系统性能的试验方法——第2部分:车辆对行人的制动系统.pdf
- 国际标准 ISO 22734:2019 EN 使用水电解的氢气发生器 工业、商业和住宅应用 Hydrogen generators using water electrolysis — Industrial, commercial, and residential applications.pdf
- 国际标准 ISO 22734:2019 EN Hydrogen generators using water electrolysis — Industrial, commercial, and residential applications 使用水电解的氢气发生器 工业、商业和住宅应用.pdf
- 国际标准 ISO 22735:2021 EN 道路车辆 评估车道保持辅助系统性能的测试方法 Road vehicles — Test method to evaluate the performance of lane-keeping assistance systems.pdf
- 国际标准 ISO 22735:2021 EN Road vehicles — Test method to evaluate the performance of lane-keeping assistance systems 道路车辆 评估车道保持辅助系统性能的测试方法.pdf
- 国际标准 ISO 22737:2021 EN 智能交通系统 用于预定路线的低速自动驾驶(LSAD)系统 性能要求、系统要求和性能测试程序 Intelligent transport systems — Low-speed automated driving (LSAD) systems for predefined routes — Performance requirements, system requirements and performance test procedures.pdf
- 国际标准 ISO 22737:2021 EN Intelligent transport systems — Low-speed automated driving (LSAD) systems for predefined routes — Performance requirements, system requirements and performance test procedures 智能交通系统 用于预定路线的低速自动驾驶(LSAD)系统 性能要求、系统要求和性能测试程序.pdf
- 国际标准 ISO 22738:2020 EN 智能交通系统 本地化通信 摄像头光学通信 Intelligent transport systems — Localized communications — Optical camera communication.pdf
- 国际标准 ISO 22738:2020 EN Intelligent transport systems — Localized communications — Optical camera communication 智能交通系统 本地化通信 摄像头光学通信.pdf
- 国际标准 ISO 22772:2020 EN Space systems — Requirements of launch vehicle (LV) to electrical ground support equipment (EGSE) interfaces 空间系统 运载火箭 (LV) 与地面电子支持设备 (EGSE) 接口的要求.pdf
- 国际标准 ISO 22774:2004 EN 鞋类 配件的测试方法:鞋带 耐磨性 Footwear — Test methods for accessories: shoe laces — Abrasion resistance.pdf
- 国际标准 ISO 22774:2004 EN Footwear — Test methods for accessories: shoe laces — Abrasion resistance 鞋类 配件的测试方法:鞋带 耐磨性.pdf
- 国际标准 ISO 22775:2004 EN 鞋类 配件的测试方法:金属附件 耐腐蚀性 Footwear — Test methods for accessories: Metallic accessories — Corrosion resistance.pdf
- 国际标准 ISO 22775:2004 EN Footwear — Test methods for accessories: Metallic accessories — Corrosion resistance 鞋类 配件的测试方法:金属附件 耐腐蚀性.pdf
- 国际标准 ISO 22776:2004 EN 鞋类 配件的测试方法:触摸和闭合紧固件 反复闭合前后的剪切强度 Footwear — Test methods for accessories: Touch and close fasteners — Shear strength before and after repeated closing.pdf
- 国际标准 ISO 22776:2004 EN Footwear — Test methods for accessories: Touch and close fasteners — Shear strength before and after repeated closing 鞋类 配件的测试方法:触摸和闭合紧固件 反复闭合前后的剪切强度.pdf
- 国际标准 ISO 22777:2004 EN 鞋类 配件的测试方法:触摸和闭合紧固件 反复闭合前后的剥离强度 Footwear — Test methods for accessories: Touch and close fasteners — Peel strength before and after repeated closing.pdf
- 国际标准 ISO 22777:2004 EN Footwear — Test methods for accessories: Touch and close fasteners — Peel strength before and after repeated closing 鞋类 配件的测试方法:触摸和闭合紧固件 反复闭合前后的剥离强度.pdf
- 国际标准 ISO 22778:2006 EN 金属涂层 钢铁上的物理气相沉积镉涂层 规范和测试方法 Metallic coatings — Physical vapour-deposited coatings of cadmium on iron and steel — Specification and test methods.pdf
最近下载
- 四章复式记账法的应用1ppt课件.pptx
- 中国建设工程鲁班奖(国家优质工程)复查工作细则(2021年修订).pdf VIP
- 肿瘤放射治疗技术基础知识-4.pdf VIP
- AP微观经济学 2018年真题 附答案和评分标准 AP Microeconomics 2018 Real Exam with Answers and Scoring Guidelines.pdf VIP
- GS97060-3宝马集团车辆内饰表面标准.pdf VIP
- 苏州高新区2024-2025学年第二学期初三物理3月月考卷(含答案).pdf VIP
- 肿瘤放射治疗技术基础知识-3.pdf VIP
- 肿瘤放射治疗技术基础知识 2.doc VIP
- 电网规划流程介绍.ppt VIP
- 网约车从业资格证考试题库及答案大全.doc VIP
原创力文档

文档评论(0)