【英语版】国际标准 ISO 24102-4:2018 EN 智能交通系统 智能交通系统车站管理 第4部分:车站内部管理通信 Intelligent transport systems — ITS station management — Part 4: Station-internal management communications.pdf
- 1
- 0
- 2024-07-26 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 2018-10-31 颁布
- 1、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 2、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 3、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO24102-4:2018《智能运输系统-ITS车站管理-第4部分:车站内部管理通信》是一个关于智能运输系统的国际标准,专门针对ITS(智能运输系统)车站管理的第四个部分,涉及车站内部的通信管理。这个标准旨在规定车站内部管理的通信过程和相关通信协议,以确保车站内的各个系统和设备之间的有效协作和信息共享。该标准涵盖了车站内部管理通信的各种方面,包括通信协议、数据交换、信息共享、安全性和可靠性等。
这个标准提供了车站内部管理通信的框架和指南,以便车站管理人员能够有效地管理和协调车站内的各个系统和设备,确保车站的正常运行和提供高效、安全和舒适的交通服务。这个标准的主要目标是提高车站的运营效率、减少事故和提高乘客的满意度。
在实施ISO24102-4:2018标准时,需要考虑到各种实际情况和具体要求,包括车站的大小、设施、设备和系统等。还需要考虑安全性和隐私性方面的要求,以确保车站内部通信的安全和保密性。因此,实施这个标准需要车站管理人员、系统供应商和相关机构的合作和努力。
ISO24102-4:2018标准是关于智能运输系统车站内部管理通信的重要指南,旨在提高车站的运营效率、安全性和舒适性,并确保车站内的各个系统和设备之间的有效协作和信息共享。
您可能关注的文档
- 国际标准 ISO 24025-1:2020 EN 塑料 砜类聚合物模塑和挤出材料 第1部分:指定系统和规范依据 Plastics — Sulfone polymer moulding and extrusion materials — Part 1: Designation system and basis for specifications.pdf
- 国际标准 ISO 24025-1:2020 EN Plastics — Sulfone polymer moulding and extrusion materials — Part 1: Designation system and basis for specifications 塑料 砜类聚合物模塑和挤出材料 第1部分:指定系统和规范依据.pdf
- 国际标准 ISO 24025-2:2020 EN 塑料 砜类聚合物模塑和挤出材料 第2部分:试样制备和性能测定 Plastics — Sulfone polymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties.pdf
- 国际标准 ISO 24025-2:2020 EN Plastics — Sulfone polymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties 塑料 砜类聚合物模塑和挤出材料 第2部分:试样制备和性能测定.pdf
- 国际标准 ISO 24026-1:2020 EN 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤出材料 第1部分:指定系统和规范依据 Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 1: Designation system and basis for specifications.pdf
- 国际标准 ISO 24026-1:2020 EN Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 1: Designation system and basis for specifications 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤出材料 第1部分:指定系统和规范依据.pdf
- 国际标准 ISO 24026-2:2020 EN 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤出材料 第2部分:试样制备和性能测定 Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties.pdf
- 国际标准 ISO 24026-2:2020 EN Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤出材料 第2部分:试样制备和性能测定.pdf
- 国际标准 ISO 2403:2021 EN 纺织品 棉纤维 微米值的测定 Textiles — Cotton fibres — Determination of micronaire value.pdf
- 国际标准 ISO 2403:2021 EN Textiles — Cotton fibres — Determination of micronaire value 纺织品 棉纤维 微米值的测定.pdf
- 国际标准 ISO 24102-4:2018 EN Intelligent transport systems — ITS station management — Part 4: Station-internal management communications 智能交通系统 智能交通系统车站管理 第4部分:车站内部管理通信.pdf
- 国际标准 ISO 24102-6:2018 EN 智能交通系统 地面移动通信接入(CALM) 智能交通系统站点管理 第6部分:路径和流量管理 Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 6: Path and flow management.pdf
- 国际标准 ISO 24102-6:2018 EN Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 6: Path and flow management 智能交通系统 地面移动通信接入(CALM) 智能交通系统站点管理 第6部分:路径和流量管理.pdf
- 国际标准 ISO 24103:2009 EN 智能交通系统 陆地移动通信接入 (CALM) 媒体适配接口层 (MAIL) Intelligent transport systems — Communications access for land mobiles (CALM) — Media adapted interface layer (MAIL).pdf
- 国际标准 ISO 24103:2009 EN Intelligent transport systems — Communications access for land mobiles (CALM) — Media adapted interface layer (MAIL) 智能交通系统 陆地移动通信接入 (CALM) 媒体适配接口层 (MAIL).pdf
- 国际标准 ISO 2411:2017 EN 橡胶或塑料涂层织物 涂层附着力的测定 Rubber- or plastics-coated fabrics — Determination of coating adhesion.pdf
- 国际标准 ISO 2411:2017 EN Rubber- or plastics-coated fabrics — Determination of coating adhesion 橡胶或塑料涂层织物 涂层附着力的测定.pdf
- 国际标准 ISO 24113:2023 EN 空间系统 空间碎片缓减要求 Space systems — Space debris mitigation requirements.pdf
- 国际标准 ISO 24113:2023 EN Space systems — Space debris mitigation requirements 空间系统 空间碎片缓减要求.pdf
- 国际标准 ISO 24114:2011 EN 速溶咖啡 真伪标准 Instant coffee — Criteria for authenticity.pdf
文档评论(0)