【英语版】国际标准 ISO 24102-6:2018 EN 智能交通系统 地面移动通信接入(CALM) 智能交通系统站点管理 第6部分:路径和流量管理 Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 6: Path and flow management.pdf
- 0
- 0
- 2024-07-26 发布于四川
-
正版发售
- 现行
- 正在执行有效期
- | 2018-05-11 颁布
- 1、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 2、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 3、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO24102-6:2018ENIntelligenttransportsystems—Communicationsaccessforlandmobiles(CALM)—ITSstationmanagement—Part6:Pathandflowmanagement是关于智能交通系统(ITS)的通信访问,特别是陆地移动通信(CALM)的应用,其一部分是路径和流量管理。这是一个重要的部分,它涉及交通信号灯的配置,路线的设定,交通流量的调整,以及所有这些方面的自动化和优化控制。该标准定义了一套详细的规则和标准,以使ITS系统能够更好地管理和优化道路交通流量,减少交通拥堵,提高交通效率,同时也考虑到了安全性因素。这些规则和标准涉及到从交通信号灯的配对,到道路交叉口的优化配置,再到实时交通信息的收集和分析等各个方面。ISO24102-6:2018ENITSstationmanagementPart6:Pathandflowmanagement是一个非常重要的标准,它为ITS系统提供了更智能,更有效的管理方法,从而改善了我们的交通环境。
您可能关注的文档
- 国际标准 ISO 24025-1:2020 EN 塑料 砜类聚合物模塑和挤出材料 第1部分:指定系统和规范依据 Plastics — Sulfone polymer moulding and extrusion materials — Part 1: Designation system and basis for specifications.pdf
- 国际标准 ISO 24025-1:2020 EN Plastics — Sulfone polymer moulding and extrusion materials — Part 1: Designation system and basis for specifications 塑料 砜类聚合物模塑和挤出材料 第1部分:指定系统和规范依据.pdf
- 国际标准 ISO 24025-2:2020 EN 塑料 砜类聚合物模塑和挤出材料 第2部分:试样制备和性能测定 Plastics — Sulfone polymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties.pdf
- 国际标准 ISO 24025-2:2020 EN Plastics — Sulfone polymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties 塑料 砜类聚合物模塑和挤出材料 第2部分:试样制备和性能测定.pdf
- 国际标准 ISO 24026-1:2020 EN 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤出材料 第1部分:指定系统和规范依据 Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 1: Designation system and basis for specifications.pdf
- 国际标准 ISO 24026-1:2020 EN Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 1: Designation system and basis for specifications 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤出材料 第1部分:指定系统和规范依据.pdf
- 国际标准 ISO 24026-2:2020 EN 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤出材料 第2部分:试样制备和性能测定 Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties.pdf
- 国际标准 ISO 24026-2:2020 EN Plastics — Poly(methyl methacrylate) (PMMA) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤出材料 第2部分:试样制备和性能测定.pdf
- 国际标准 ISO 2403:2021 EN 纺织品 棉纤维 微米值的测定 Textiles — Cotton fibres — Determination of micronaire value.pdf
- 国际标准 ISO 2403:2021 EN Textiles — Cotton fibres — Determination of micronaire value 纺织品 棉纤维 微米值的测定.pdf
- 国际标准 ISO 24102-6:2018 EN Intelligent transport systems — Communications access for land mobiles (CALM) — ITS station management — Part 6: Path and flow management 智能交通系统 地面移动通信接入(CALM) 智能交通系统站点管理 第6部分:路径和流量管理.pdf
- 国际标准 ISO 24103:2009 EN 智能交通系统 陆地移动通信接入 (CALM) 媒体适配接口层 (MAIL) Intelligent transport systems — Communications access for land mobiles (CALM) — Media adapted interface layer (MAIL).pdf
- 国际标准 ISO 24103:2009 EN Intelligent transport systems — Communications access for land mobiles (CALM) — Media adapted interface layer (MAIL) 智能交通系统 陆地移动通信接入 (CALM) 媒体适配接口层 (MAIL).pdf
- 国际标准 ISO 2411:2017 EN 橡胶或塑料涂层织物 涂层附着力的测定 Rubber- or plastics-coated fabrics — Determination of coating adhesion.pdf
- 国际标准 ISO 2411:2017 EN Rubber- or plastics-coated fabrics — Determination of coating adhesion 橡胶或塑料涂层织物 涂层附着力的测定.pdf
- 国际标准 ISO 24113:2023 EN 空间系统 空间碎片缓减要求 Space systems — Space debris mitigation requirements.pdf
- 国际标准 ISO 24113:2023 EN Space systems — Space debris mitigation requirements 空间系统 空间碎片缓减要求.pdf
- 国际标准 ISO 24114:2011 EN 速溶咖啡 真伪标准 Instant coffee — Criteria for authenticity.pdf
- 国际标准 ISO 24114:2011 EN Instant coffee — Criteria for authenticity 速溶咖啡 真伪标准.pdf
- 国际标准 ISO 24115:2012 EN 生咖啡豆 水分测量仪校准程序 常规方法 Green coffee — Procedure for calibration of moisture meters — Routine method.pdf
文档评论(0)