【英语版】国际标准 ISO 9020:1994 EN 油漆和清漆的粘合剂 氨基树脂游离甲醛含量的测定 亚硫酸钠滴定法 Binders for paints and varnishes — Determination of free-formaldehyde content of amino resins — Sodium sulfite titrimetric method.pdf
- 4
- 0
- 2025-01-11 发布于四川
-
正版发售
- 废止
- 已被废除、停止使用,并不再更新修订
- | 1994-02-03 颁布
- 1、本网站所提供的标准文本仅供个人学习、研究之用,未经授权,严禁复制、发行、汇编、翻译或网络传播等,侵权必究。
- 2、本网站所提供的标准均为PDF格式电子版文本(可阅读打印),因数字商品的特殊性,一经售出,不提供退换货服务。
- 3、标准文档要求电子版与印刷版保持一致,所以下载的文档中可能包含空白页,非文档质量问题
查看更多
ISO9020:1994是关于涂料和清漆用胶粘剂中游离甲醛含量的氨基树脂的确定方法。其中涉及到了应用了无硫酸氢钠滴定法的钠盐游离甲醛含量的测定标准。这个方法通常涉及到的是以某些胶粘剂和涂料产品为主要原料的制程、成品检验以及应用中的一些控制和测定问题。这种方法一般不用于严格控制甲醛含量在低于可接受水平的产品中。其中还提到了一种硫代硫酸钠滴定法,该方法对于游离甲醛含量的测定是一种常用的标准方法,该方法简单易行,操作简便,适合实验室或生产线上的常规测定。另外,本标准中还提到了几种常用的分析试剂和材料,如酚酞指示剂、盐酸、氢氧化钠、盐酸萘乙二胺液等,这些都是在进行游离甲醛含量测定时常用的试剂和材料。对于那些含有较高甲醛含量的产品,我们还需要采用其他的方法来控制甲醛含量,以保证产品的质量和安全。ISO9020:1994标准提供了一种实用的方法来测定涂料和清漆用胶粘剂中游离甲醛的含量,有助于我们更好地控制产品质量和安全。
您可能关注的文档
- 国际标准 ISO 9012:1998 EN Gas welding equipment — Air-aspirated hand blowpipes — Specifications and tests 气焊设备 手动吹气管 规范和试验.pdf
- 国际标准 ISO 9012:2008 EN 气焊设备 手动吹气管 规范和试验 Gas welding equipment — Air-aspirated hand blowpipes — Specifications and tests.pdf
- 国际标准 ISO 9012:2008 EN Gas welding equipment — Air-aspirated hand blowpipes — Specifications and tests 气焊设备 手动吹气管 规范和试验.pdf
- 国际标准 ISO 9013:1992 EN 焊接及相关工艺 热切割(氧气/燃气火焰)表面的质量分类和尺寸公差 Welding and allied processes — Quality classification and dimensional tolerances of thermally cut (oxygen/fuel gas flame) surfaces.pdf
- 国际标准 ISO 9013:1992 EN Welding and allied processes — Quality classification and dimensional tolerances of thermally cut (oxygen/fuel gas flame) surfaces 焊接及相关工艺 热切割(氧气/燃气火焰)表面的质量分类和尺寸公差.pdf
- 国际标准 ISO 9013:2002 EN 热切割 热切割的分类 产品几何规范和质量公差 Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances.pdf
- 国际标准 ISO 9013:2002 EN Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances 热切割 热切割的分类 产品几何规范和质量公差.pdf
- 国际标准 ISO 9015-2:2003 EN 金属材料焊缝的破坏性试验 硬度测试 第2部分:焊点显微硬度测试 Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints.pdf
- 国际标准 ISO 9015-2:2003 EN Destructive tests on welds in metallic materials — Hardness testing — Part 2: Microhardness testing of welded joints 金属材料焊缝的破坏性试验 硬度测试 第2部分:焊点显微硬度测试.pdf
- 国际标准 ISO 9016:2001 EN 金属材料焊缝的破坏性试验 冲击试验 试样位置、缺口方向和检查 Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination.pdf
- 国际标准 ISO 9020:1994 EN Binders for paints and varnishes — Determination of free-formaldehyde content of amino resins — Sodium sulfite titrimetric method 油漆和清漆的粘合剂 氨基树脂游离甲醛含量的测定 亚硫酸钠滴定法.pdf
- 国际标准 ISO 9021:1988 EN 摩托车 控制器 类型、位置和功能 Motorcycles — Controls — Types, positions and functions.pdf
- 国际标准 ISO 9021:1988 EN Motorcycles — Controls — Types, positions and functions 摩托车 控制器 类型、位置和功能.pdf
- 国际标准 ISO 9022-1:1994 EN 光学和光学仪器 环境测试方法 第1部分:定义、测试范围 Optics and optical instruments — Environmental test methods — Part 1: Definitions, extent of testing.pdf
- 国际标准 ISO 9022-1:1994 EN Optics and optical instruments — Environmental test methods — Part 1: Definitions, extent of testing 光学和光学仪器 环境测试方法 第1部分:定义、测试范围.pdf
- 国际标准 ISO 9022-1:2012 EN 光学和光子学 环境测试方法 第1部分:定义、测试范围 Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing.pdf
- 国际标准 ISO 9022-1:2012 EN Optics and photonics — Environmental test methods — Part 1: Definitions, extent of testing 光学和光子学 环境测试方法 第1部分:定义、测试范围.pdf
- 国际标准 ISO 9022-10:1994 EN 光学和光学仪器 环境试验方法 第10部分:正弦振动、干热或干冷组合试验 Optics and optical instruments — Environmental test methods — Part 10: Combined sinusoidal vibration, dry heat or cold.pdf
- 国际标准 ISO 9022-10:1994 EN Optics and optical instruments — Environmental test methods — Part 10: Combined sinusoidal vibration, dry heat or cold 光学和光学仪器 环境试验方法 第10部分:正弦振动、干热或干冷组合试验.pdf
- 国际标准 ISO 9022-10:1998 EN 光学和光学仪器 环境试验方法 第10部分:正弦振动和干热或干冷联合试验 Optics and optical instruments — Environmental test methods — Part 10: Combined sinusoidal vibration and dry heat or cold.pdf
最近下载
- 传热学第5版课后习题答案(杨世铭-陶文铨)].docx VIP
- 医疗器械经营质量管理制度及目录、工作程序.pdf VIP
- 02S404 防水套管国标规范.pdf VIP
- 重型车DPF标定手册.pdf VIP
- 办公租赁合同模板下载(3篇).docx VIP
- GB∕T 39743-2021 滑动轴承 热塑性塑料轴套 尺寸与公差.docx VIP
- 《GB8958-2006缺氧危险作业安全规程》(2025版)深度解析.pptx
- JTT 660-2006 -水上加油站安全与防污染技术要求.pdf VIP
- 药品处方集课件.pptx VIP
- 2022-2023学年浙江省9+1高中联盟高二上学期期中考试 英语 试题(学生版+解析版).docx
原创力文档


文档评论(0)