GH4169高温合金晶粒长大动力学模型.pdfVIP

2024年第53卷第9期热加工工艺ISSN1001-3814

Vol.53No.92024HotWorkingTechnologyCN61-1133/TG

DOI:10.14158/j.cnki.1001-3814.

http://www.rjrjggy@

GH4169高合金晶粒长大动力学模型

黄海,兰箭,顾青

(武汉理工大学材料科学与工程学院,湖北武汉430070)

摘要采用OM尧SEM等分析方法对GH4169高温合金在960～1080下的晶粒长大行为进行研究获得不同加

热温度和保温时间下合金的平均晶粒尺寸并观察到啄相的钉扎效应对晶粒长大的阻碍遥考虑啄相的钉扎效应建立了

GH4169晶粒长大模型并对晶粒的长大情况进行预测遥对比发现预测值与实验值吻合较好模型具有较好的准确性遥

研究结果可为GH4169高温合金的处理工艺的制定和实际生产应用提供理论依据遥

关键词GH4169高温合金曰晶粒长大曰钉扎效应

中图分类号TG166.7文献标识码A文章编号1001-3814(2024)09-0146-03

DynamicModelofGrainGrowthofGH4169Superalloy

HUANGHai,LANJian,GUQing

(SchoolofMaterialsScienceandEngineering,WuhanUniversityofTechnology,Wuhan430070,China)

Abstract院ThegraingrowthbehaviorofGH4169superalloyat960-1080wasstudiedbyOM,SEMandotheranalysis

methods.Theaveragegrainsizeofthealloyatdifferentheatingtemperaturesandholdingtimewasobtained,anditwas

observedthatthepinningeffectofthe啄phaseshouldhinderthegraingrowth.Consideringthepinningeffectof啄phase,the

GH4169graingrowthdynamicmodelwasestablishedandthegraingrowthsituationwaspredicted.Thecomparisonresults

showthatthepredictedvalueagreeswellwiththeexperimentalvalue,andthemodelisrelativelyaccurate.Theresearch

resultscanprovidetheoreticalbasisforthedevelopmentofheattreatmenttechnologyandpracticalprodu