双膛石灰窑上料系统分析及优化.pdfVIP

2024年10月耐火与石灰47

第49卷第5期··

双膛石灰窑上料系统分析及优化

王浩曾潇

410205

（中冶长天国际工程有限责任公司,长沙）

摘要：上料系统是双膛石灰窑的重要组成部分，本文介绍了双膛石灰窑现行主流的上料系统，结合生产经验分析了该

上料系统的不足，提出了一种针对双膛石灰窑上料系统的优化设计方案，并成功应用于工程实践。采用优化后的双膛石

灰窑上料系统，减少了运转设备的数量，降低了设备故障率，石灰窑的生产作业率得到有效提高，同时降低了现场检修

人员的工作强度，使双膛石灰窑在作业率、成本、环保、安全等方面均有明显提升，本次优化设计取得了良好的实用效果。

关键词：双膛石灰窑；上料系统；优化方案；工程实践

中图分类号：TQ175.653.6文献标识码：A文章编号：1673-7792（2024）05-0047-03

Analysisandoptimizationoffeedingsystemoftwinshaftlimekiln

Wang HaoZeng Xiao

（MCC Changtian International Engineering Co.，Ltd.，Changsha 410205，China）

Abstract：Feeding system is an important component of the twin shaft lime kiln. The article briefs

the available mainstream feeding systems of the lime kiln，looks into the shortcomings of the feeding

systems based on production experience，and proposes an optimized design scheme for feeding systems

of the lime kiln，which has been successfully applied in engineering projects. The optimized feeding

system of twin shaft lime kiln has reduced the number of operating equipment and equipment failure

rate，improved the operation rate of the lime kiln. In addition，it has reduced the workload of on-site

maintenance personnel，significantly improving the operation rate，cost-efficiency，environmental

protection effect，safety，and other aspects of the twin shaft lime kiln. The optimization design has

achieved good practical results.

Keywords：Twin shaft lime kiln；Feeding system；Optimization plan；Engineering practice