SLM铝合金表面喷射电沉积Ni-MoS_(2)自润滑复合涂层.docxVIP

窑PAGE

窑PAGE63窑

窑PAGE

窑PAGE64窑

2024年第53卷第8期

Vol.53No.82024

热加工工艺

HotWorkingTechnology

ISSN1001-3814CN61-1133/TG

DOI:10.14158/j.cnki.1001-3814.试验与研究 rjggy@

试验与研究

SLM铝合金表面喷射电沉积Ni-MoS2自润滑复合涂层

柏华文,成海霞,陈亚,娄桂宾,沈理达,田宗军

(南京航空航天大学机电学院,江苏南京210016)

摘要院采用喷射电沉积在SLM铝合金表面制备Ni-MoS2自润滑复合涂层遥用摩擦磨损试验机评价镀液中MoS2浓度对Ni-MoS2自润滑复合涂层摩擦磨损性能的影响遥结果表明院共沉积MoS2微粒能有效降低Ni-MoS2自润滑复合涂层的摩擦系数和磨损率遥与纯Ni涂层相比袁Ni-MoS2自润滑复合涂层与316L钢球对磨的摩擦系数和磨损率显著降低袁摩擦系数从0.51降至0.12袁磨损率从0.41mg/m降至0.11mg/m袁为SLM铝合金表面改善摩擦学性能提供了参考遥

关键词院Ni-MoS2自润滑复合涂层曰喷射电沉积曰增材制造曰摩擦磨损

中图分类号院TG174.44 文献标识码院A 文章编号院1001-3814(2024)08-0063-06

Ni-MoS2Self-lubricatingCompositeCoatingPreparedbyJetElectrodepositiononAluminumAlloyFormedbySLM

BAIHuawen,CHENGHaixia,CHENYa,LOUGuibin,SHENLida,TIANZongjun

(CollegeofMechanicalandElectricalEngineering,NanjingUniversityofAeronauticsandAstronautics,Nanjing210016,China)

Abstract院Ni-MoS2self-lubricatingcompositecoatingwaspreparedbyjetelectrodepositiononaluminumalloyformed

bySLM.ThefrictionandweartesterwasusedtoevaluatetheinfluenceofMoS2concentrationintheplatingsolutiononthefrictionandwearpropertiesoftheNi-MoS2self-lubricatingcompositecoating.Theresultsshowthatco-depositedMoS2particlescaneffectivelyreducethefrictioncoefficientandwearrateoftheNi-MoS2self-lubricatingcompositecoating.ComparedwiththatofpureNicoating,thefrictioncoefficientandwearrateofNi-MoS2self-lubricatingcompositecoatingand316Lsteelballonthegrindingaresignificantlyreduced,thefrictioncoefficientreducesfrom0.51to0.12,andthewearratereducesfrom0.41mg/mto0.11mg/m,whichcanprovidereferencesforimprovingthetribologicalpropertiesofaluminumalloyformedbySLM.

Keywords院Ni-MoS2self-lubricatingcompositecoating;Jetelectrodeposition;additivemanufacturing;frictionandwear

在增材制造渊additivemanufacturing袁AM冤激光粉

床熔化技术中袁选区激光