激光表面重熔Al-17Si合金组织与耐磨性研究.pdfVIP

HotWorkingTechnology2023,Vol.52,No.8

激光表面重熔Al组织与耐磨性研究

陈德旭，张艳？，李涛，吕红生，张静2

(1.江苏科技大学苏州理工学院，江苏张家港215600;2.江苏科技大学冶金与材料工程学院，江苏张家港215600)

摘要：对A1-17Si合金进行激光表面重熔处理，研究激光功率和扫描速度对合金组织变化和摩擦磨损性能的影

响。研究结果表明，Al-17Si表面重熔层厚度随激光输出功率增大而增大，随扫描速度增大而减小；初晶Si尺寸随激光

输出功率增大明显减小，随扫描速度增大略有增大；摩擦磨损系数和磨损量随激光输出功率增大而减小，随扫描速度增

大而增大。当前实验条件下，激光表面重熔A1-17Si合金最佳工艺参数为输出功率250W、扫描速度600mm/min。

关键词：A1-17Si合金；激光表面重熔；微观组织；摩擦磨损

D0I:10.14158/ki.1001-3814

中图分类号：TG174文献标识码：A文章编号：1001-3814(2023)08-0102-06

StudyonMicrostructureandWearResistance

ofLaserSurfaceRemeltingAl-17SiAlloy

CHENDexu,ZHANGYan²,LITao,LYUHongsheng,ZHANGJing?

(1.SuzhouInstituteofTechnology,JiangsuUniversityofScienceandTechnology,Zhangjiagang215600,China;2.Metallurgy

andMaterialsEngineering,JiangsuUniversityofScienceandTechnology,Zhangjiagang215600,China)

Abstract:ThesurfaceofAl-17Sialloywasremeltedbylaser.Theeffectsoflaserpowerandscanningspeedonthe

microstructureandfrictionandwearpropertiesofthealloywerestudied.Theresultsshowthatthethicknessoftheremelted

layerincreaseswiththeincreaseoflaseroutputpoweranddecreaseswiththeincreaseofscanningspeed.Thesizeofprimary

Sidecreasesobviouslywiththeincreaseoflaseroutputpowerandincreasesslightlywiththeincreaseofscanningspeed.The

frictionandwearcoefficientandwearamountdecreasewiththeincreaseoflaseroutputpowerandincreasewiththeincrease

ofscanningspeed.Underthecurrentexperimentalconditions,theoptimalprocessparametersoflasersurfaceremelting

Al-17Sialloyareoutputpower250Wandscanningspeed600mm/min.

Keywords:Al-17Sialloy;lasersurfaceremelting;microst