热浸温度对镀层耐腐蚀性能的影响.pdfVIP

《热加艺》2021年8月第50卷第16期

热浸温度对镀层耐腐蚀性能的影响

李欣，李慧荣，马涛，李孟星，张宏博，黄永智，李运刚

(华北理工大学冶金与能源学院，河北唐山063210)

摘要：研究了热浸温度对热浸纯锌镀层和Zn-11%Al-3%Mg-0.2%Si-0.02%RE合金镀层试样中元素分布、镀层厚

度和耐腐蚀性的影响。并对纯锌镀层和合金镀层进行了电化学实验。结果表明：镀层的厚度随热浸温度的升高而减小；

镀层中间过渡层在整体镀层中所占的比例，随热浸温度的升高而增大。纯锌镀层和合金镀层的耐腐蚀性随热浸温度的

升高而变差，Zn-11%Al-3%Mg-0.2%Si-0.02%RE合金镀层的耐腐蚀性优于纯锌镀层的。

关键词：合金镀层；元素分布；极化曲线；耐腐性

DOI:10.14158/j.cnki.1001-3814.

中图分类号：TG178文献标识码：A文章编号：1001-3814(2021)16-0081-04

EffectsofHotDipTemperatureonCorrosionResistanceofCoatings

LIXin,LIHuirong,MATao,LIMengxing,ZHANGHongbo,HUANGYongzhi,LIYungang

(CollegeofMetallurgyandEnergy,NorthChinaUniversityofTechnology,Tangshan063210,China)

AbstractTheeffectsofhotdip：temperatureontheelementdistribution,coatingthicknessandcoosionresistanceof

hotdippurezinccoatingandZn-11%Al-3%Mg-0.2%Si-0.02%REalloycoatingwerestudied.Theelectrochemical

experimentsofthehotdippurezinccoatingandZn-1l%Al-3%Mg-0.2%Si-0.02%REalloycoatingwerecaiedout.The

resultsshowthatthethicknessofthecoatingsdecreasewiththeincreaseofhotdiptemperature,andtheproportionofthe

intermediatetransitionlayerintheoverallcoatingincreaseswiththeincreaseofhotdiptemperature.Thecoosionresistance

ofthepurezinccoatingandalloycoatingdecreasewiththeincreaseofhotdiptemperature.Thecoosionresistanceof

Zn-1l%Al-3%Mg-0.2%Si-0.02%REalloycoatingisbetterthanthatofpurezinccoating.

Keywordsalloycoating;elementdistribution;polarizationcurve;co：osionresistance

采用热浸镀法制备热镀镀层是提高钢铁材料性